Page 8 of 8
Re: 1991 Suzuki Samurai build
Posted: Sat Oct 26, 2013 11:22 pm
by gp7186
dazerede wrote:Wow u have done a realy nice job on.this sj
All I need to.do is paint the backplates and jobs a gooden
Thanks I have rebuild kits for both sides as the swivel seals are leaking and kingpin bearings showing some wear so I will strip everything down and paint e, t, c . Thats my next job along with the exhaust
Re: 1991 Suzuki Samurai build
Posted: Mon Nov 04, 2013 3:05 pm
by gp7186
Managed to get both sides rebuilt with new wheel bearings, half shaft seals, kingpin bearings and swivel seals also cleaned and sprayed everything up
- IMG_2013110412214.jpg (52.16 KiB) Viewed 10464 times
- IMG_2013110438294.jpg (45.56 KiB) Viewed 10464 times
Re: 1991 Suzuki Samurai build
Posted: Mon Nov 04, 2013 6:41 pm
by dazerede
Looks good.mate that's what I.need to do on my.front axle bearings
Re: 1991 Suzuki Samurai build
Posted: Mon Jul 20, 2015 10:19 pm
by chazz_543
Hello mate I would like to know how your toyota prop is working out for you. I have unparallel prop angles and hoped this mod would help. I am thinking front and back with a notch cut out the chassis at the front.
Re: 1991 Suzuki Samurai build
Posted: Tue Jul 21, 2015 9:46 am
by gp7186
Well i dont really use it that often but i have no vibration coming from it and it made a massive improvement to the way it drives, well worth doing
Cheers gaz
Re: 1991 Suzuki Samurai build
Posted: Tue Jul 21, 2015 4:09 pm
by chazz_543
Thanx for getting back to me I will have a look in to it.
Re: 1991 Suzuki Samurai build
Posted: Mon Sep 28, 2015 12:08 pm
by gp7186
Time for a little update i think in the last month ive replaced:
- Timing belt, tensioner and water pump
- Front wheel hub bearings and seals
- Rear wheel bearings and seals
- General engine service oil, filters e,t,c
- Wheels replaced for steel 15x7 rims refitted my original 31" tyres
- Oh and a damn good clean
- IMG_20150928_38980.jpg (76.41 KiB) Viewed 10074 times
- IMG_20150928_48505.jpg (73.36 KiB) Viewed 10074 times
- IMG_20150928_28128.jpg (84.68 KiB) Viewed 10074 times
Re: 1991 Suzuki Samurai build
Posted: Mon Sep 28, 2015 12:25 pm
by r-nottz
This thing is damm tidy, fair play mate.
Re: 1991 Suzuki Samurai build
Posted: Thu Feb 04, 2016 9:53 pm
by kevinsantos
hello. I was seeing your build and i need some help on the mounts. do you have any PDF or something with measurement like a blueprint. that will help me alot
. thanks
Re: 1991 Suzuki Samurai build
Posted: Fri Feb 05, 2016 9:31 pm
by gp7186
Sorry but I thought I did have some drawings but I can't for life of me think where I have put them perhaps I have thrown them out but more than likely I have them in a safe place so safe I can't find them myself but il keep looking. To be honest though the brackets are pretty self explanatory if you put a spring in place and make a template.