Elsie

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Elsie

Post by donkeychomp » Thu Oct 01, 2015 9:29 pm

Picked up the rebuilt calipers today and gave them a lick of high heat paint and lacquer (also high heat) only to find the right hand one has been put together backwards. Guess I'll take it back tomorrow and get them to do it right. On a happier note the MOT tester says the DVLA have got their arse in gear and she can get MOT'd!

Also been on the lookout for a single race seat for Elsie...you can get them new but they are very expensive...then I saw two seats on ebay for £40 all in with postage. They turned up and one is for an LC, even has the correct size recess to accept the original rear light the other is for an RD so I'll clean that on up and sell it on.
Attachments
WP_20150928_001.jpg
WP_20150928_001.jpg (334.49 KiB) Viewed 6749 times
WP_20150928_002.jpg
WP_20150928_002.jpg (393.28 KiB) Viewed 6749 times
WP_20150929_002.jpg
WP_20150929_002.jpg (286.13 KiB) Viewed 6749 times
WP_20150929_003.jpg
WP_20150929_003.jpg (371.25 KiB) Viewed 6749 times
WP_20151001_002.jpg
WP_20151001_002.jpg (454.88 KiB) Viewed 6749 times
If it ticks over...leave it

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Elsie

Post by donkeychomp » Fri Oct 09, 2015 12:00 am

Same old same old. I finished the race seat today and does it fit? Does it my shiny metal ass. However the other seat does...it was made for an LC...other seat for an RD and I plonked it on the race bike to check...I think it looks superb. So the original RD seat will go on ebay!
Attachments
WP_20151007_002.jpg
WP_20151007_002.jpg (385.56 KiB) Viewed 6728 times
WP_20151007_003.jpg
WP_20151007_003.jpg (366.53 KiB) Viewed 6728 times
WP_20151007_004.jpg
WP_20151007_004.jpg (360.52 KiB) Viewed 6728 times
WP_20151007_005.jpg
WP_20151007_005.jpg (366.44 KiB) Viewed 6728 times
WP_20151008_002.jpg
WP_20151008_002.jpg (356.28 KiB) Viewed 6728 times
WP_20151008_005.jpg
WP_20151008_005.jpg (360.08 KiB) Viewed 6728 times
WP_20151008_004.jpg
WP_20151008_004.jpg (362.69 KiB) Viewed 6728 times
WP_20151008_006.jpg
WP_20151008_006.jpg (414.95 KiB) Viewed 6728 times
WP_20151008_007.jpg
WP_20151008_007.jpg (478.56 KiB) Viewed 6728 times
If it ticks over...leave it

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Elsie

Post by donkeychomp » Sun Oct 25, 2015 11:53 pm

DONG! The headlines tonight..DVLA finally recognise Elsie and she can go have an MOT. DONG! Much frantic front brake rebuilding and bleeding. DONG! Race seat finished and is on.

Enough news at 10...all is well in the LC world. She is booked in for an MOT on tuesday, now the 3rd try. The race seat IS on but to be honest I think it spoils the clean lines of the bike. However when I hit the power band on her I get thrown off the back so this will act as a bum stop and I can really nail the old girl on the way to the MOT testers. I will either put the old seat back on or try and find a less aggressive looking race seat. For now it'll do.
Attachments
WP_20151022_001.jpg
WP_20151022_001.jpg (171.42 KiB) Viewed 6681 times
WP_20151022_004.jpg
WP_20151022_004.jpg (166.77 KiB) Viewed 6681 times
If it ticks over...leave it

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Elsie

Post by Anton » Mon Oct 26, 2015 2:33 pm

donkeychomp wrote:DONG! The headlines tonight..DVLA finally recognise Elsie and she can go have an MOT. DONG! Much frantic front brake rebuilding and bleeding. DONG! Race seat finished and is on.
:armsup:
donkeychomp wrote:Enough news at 10...all is well in the LC world. She is booked in for an MOT on tuesday, now the 3rd try. The race seat IS on but to be honest I think it spoils the clean lines of the bike. However when I hit the power band on her I get thrown off the back so this will act as a bum stop and I can really nail the old girl on the way to the MOT testers. I will either put the old seat back on or try and find a less aggressive looking race seat. For now it'll do.
It'll look better once she's painted, plus it won't look "wrong" when you're riding, your body will break up the lines anyway.

Mine would break up the suspension, but that's another thing...

Having said that, to my eye, it would look better with something with sweeping curves, ala:

Image

I know that seat isn't right either, but I do like the sweeping lines.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

User avatar
RickUK
Can I have a tow
Can I have a tow
Posts: 459
Joined: Sat Jan 09, 2010 7:31 pm
Location: Not sure me Tom Tom is bust,but it could be North of Watford Gap.Could be Bedfordshire though.
Contact:

Re: Elsie

Post by RickUK » Mon Oct 26, 2015 2:45 pm

The bike is co0ming along really nice,but the race seat just does not look right,it may help you when you are turning up the wick into the power band but for looks it just detracts from the looks big time.That other bike that you have is just a total balls out racer,its what 2 smokes are all about,i bet the power is just like switching a light switch on ie all or nothing power wise.

Good luck with the MOT,my Vitara is being welded up this week,so should have a pass ticket on it before the weekend.
Deceased.
SJ413 tinwormed to the great car grave yard in the sky.
Vitara LWB V6 engine deceased and also in the great grave yard in the sky.
www.hideones.info www.hideones.info
Current wheels.
BMW X5 Le Mans 3.0turbo diesel.
Looking for a newish Suzuki Jimny.

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Elsie

Post by donkeychomp » Tue Oct 27, 2015 8:18 pm

3rd time's the charm...
Attachments
WP_20151027_004.jpg
WP_20151027_004.jpg (150.3 KiB) Viewed 6633 times
WP_20151027_008.jpg
WP_20151027_008.jpg (137.6 KiB) Viewed 6633 times
WP_20151027_009.jpg
WP_20151027_009.jpg (120.24 KiB) Viewed 6633 times
If it ticks over...leave it

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Elsie

Post by ROBBIE » Tue Oct 27, 2015 8:46 pm

:doublethumbs:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Elsie

Post by Anton » Wed Oct 28, 2015 2:30 am

:rockin:
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Elsie

Post by donkeychomp » Sun Nov 29, 2015 12:14 am

Fat lot of good the MOT did me. After advice from the Yamaha forum I filled in form V55 (new log book thingy) and sent it off with all the docs they required. Comes back saying I didn't enclose the correct fee. It's £55 for a new V5 but an added £38 for a years tax..hey ho. Then the BIGGIE. No NOVA document. Notification of Vehicle Arrival. Cock. With yet more forum help I registered with the government's website and had a go and boy oh boy is it complicated. With the forum's advice I did tell a few porkies as I went along and 2 minutes after I finished it and submitted it I got an email saying NOVA accepted!! Fee? Nada. YES!
So monday I will mail off everything with a cheque for £93 and Elsie should get a number plate.

And while we are on a happy note I took the tail unit and side panels home and applied the decals and a ton of lacquer. Wow is all I can say, tank is next.
Attachments
WP_20151128_001.jpg
WP_20151128_001.jpg (154.74 KiB) Viewed 6550 times
WP_20151128_002.jpg
WP_20151128_002.jpg (208.56 KiB) Viewed 6550 times
WP_20151128_003.jpg
WP_20151128_003.jpg (220.65 KiB) Viewed 6550 times
WP_20151128_004.jpg
WP_20151128_004.jpg (199.22 KiB) Viewed 6550 times
WP_20151128_005.jpg
WP_20151128_005.jpg (181.02 KiB) Viewed 6550 times
WP_20151128_006.jpg
WP_20151128_006.jpg (182.32 KiB) Viewed 6550 times
WP_20151128_007.jpg
WP_20151128_007.jpg (136.02 KiB) Viewed 6550 times
WP_20151128_008.jpg
WP_20151128_008.jpg (230.45 KiB) Viewed 6550 times
If it ticks over...leave it

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Elsie

Post by Anton » Sun Nov 29, 2015 3:50 am

Looking good there!

I think I like Zonky's colour scheme a bit more, but that does look good. Probably easier to live with day to day too - less lairy.

Still, you know me, I do like loud. :D
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Post Reply