Page 7 of 35

Re: Kiwizook's resto

Posted: Fri Feb 15, 2013 10:41 pm
by dazerede
It is loads of blisters in.your eyes and each time you blink it .pops the blisters and hurts
Thats what.I was told from an Romanian guy

It is like grit sand in your eyes

Re: Kiwizook's resto

Posted: Sat Feb 23, 2013 12:32 am
by kiwizook
so, a bit of a pictorial update, this is how she looks now
Pic_0222_105.jpg
Pic_0222_105.jpg (732.36 KiB) Viewed 6737 times
and some of the stuff I have to fix, the fuel tank support, the exaust someone fixed using too small tube, and the rear bed supports, only the two front ones
Pic_0222_107.jpg
Pic_0222_107.jpg (658.48 KiB) Viewed 6737 times
Pic_0222_108.jpg
Pic_0222_108.jpg (706.06 KiB) Viewed 6737 times
Pic_0222_106.jpg
Pic_0222_106.jpg (411.72 KiB) Viewed 6737 times
and the rear axle taken off, sitting here with the rest of bits
Pic_0222_109.jpg
Pic_0222_109.jpg (618.07 KiB) Viewed 6737 times
and finally the garage when I was painting some parts this morning
Pic_0223_110.jpg
Pic_0223_110.jpg (463.55 KiB) Viewed 6737 times
and now I'm off to milk some cows for the guy I bought my sj off, and I'll use the money to pay him for the sj, as I haven't done that yet :oops:

Re: Kiwizook's resto

Posted: Sun Feb 24, 2013 9:36 pm
by ianedwards
:thumbup: i like ur style, as long as he doesn't ask for it in kind. Lol

Re: Kiwizook's resto

Posted: Mon Feb 25, 2013 8:55 am
by kiwizook
oh, and as you can see, one of the shocks needs to be replaced I think :D

Re: Kiwizook's resto

Posted: Mon Feb 25, 2013 9:06 am
by dazerede
Looks good so far

Re: Kiwizook's resto

Posted: Thu Apr 11, 2013 9:14 am
by kiwizook
time for a bit of an update, the build is going way too slow for my liking. the new developments so far are the rear springs and axle all been cleaned and painted, and all put back together, waiting to be put back on using some new bushes. Also have been painting the chassis, am up to the rear cab supports, just got to do some of the little corners, but i'll have to clean these first with a waterblaster or something, as it is really hard to get a brush in there.

also got a co2 cylinder for the welder, just waiting to certify it and fill it up, but it's so expensive.

also might make a workbench in a little shed we have that's empty, will be good to work in when it's rainy, just won't be able to get the whole pickup in there, as the door is on the wrong side and too small :thumbdown:

Re: Kiwizook's resto

Posted: Sat Apr 13, 2013 5:37 am
by kiwizook
So, have made one of the sheds into a lil workshop. can't get the pickup in there, but is good to work on parts. made a workbench out of some lvl and plywood, works a treat :thumbup:
bench i made
bench i made
Pic_0413_128.jpg (830.27 KiB) Viewed 6246 times
put most stuff in there, and this is how it looks
1
1
Pic_0413_129.jpg (373.57 KiB) Viewed 6246 times
to the left
to the left
Pic_0413_130.jpg (388.69 KiB) Viewed 6246 times
to the right
to the right
Pic_0413_131.jpg (401.06 KiB) Viewed 6246 times

Re: Kiwizook's resto

Posted: Sun Apr 14, 2013 2:30 pm
by mk1joe
thats a wonderful workshop :) i wish i lived out in Newzeeland, your very lucky! good job on the build aswell.

Re: Kiwizook's resto

Posted: Sun Apr 14, 2013 2:54 pm
by Darrell
I like the bench :thumbup:

Your not sharing the workshop with a horse are you :D .

Re: Kiwizook's resto

Posted: Sun Apr 14, 2013 8:22 pm
by kiwizook
I wouldn't even think of it, but yea, it used to be a horse stable about 5 years ago, before we moved in, and been used to rear calves in and as a chook house since, that's why all the straw is there ;)