Page 6 of 13
Re: trotters sammy... the never ending project...
Posted: Tue Jan 08, 2013 10:31 pm
by ScottieJ
Well lets see what happens with this 410 but I should have space free for an sj over the next few months so anytime really!
how wide are your alloys? I presume your tyres are 10.5" wide? If so I wouldn't run wheels that are wider than 8" otherwise you'll always be getting crap in the bead!
Re: trotters sammy... the never ending project...
Posted: Thu Jun 27, 2013 11:03 pm
by trotter
just fixed all the broken picture links... seems to take forever! (note to self don't move offroading and suzuki picture folders around in photobucket EVER again!!)
Re: trotters sammy... the never ending project...
Posted: Thu Jun 27, 2013 11:20 pm
by turbo-tom
I learnt that mistake with bookface!
Re: trotters sammy... the never ending project...
Posted: Sat Oct 19, 2013 5:33 pm
by trotter
well its been quite a while since i've bothered to get the spanners out. Only managed a few bits for about hour and a half today before it poured with rain but its a start at least
I got the vitara water rail fitted, as i couldnt use the sj one because the bolt holding it on snapped off in the engine block. Also had to do a bit of a cut and shut on the pipework from the bulkhead - water rail, as i didnt have a pipe long enough so i cut 2 down and made a copper insert at work to fit inside the joining pipes, hopefully with 2 jubilee clips it should hold fine.
the never ending list of things left to do are:
Fit
new alternator
jimny ps box
vit ps pump and res + pipes
Then fingers crossed the engine works ok. Then it will be off for mot
At some point, hopefully in the near future it will benefit from a virtual lift, box section sills (possibly haven't decided yet), YJ springs, Low Range Offroad YJ conversion kit, wheels and tyres fitted, winch bumper fitted, winch fitted, bucket seats fitted, possible rocklobster ( will see how 410 t box copes )
still it will be finished one day
Re: trotters sammy... the never ending project...
Posted: Sat Oct 19, 2013 10:39 pm
by Jordi
Glad you managed get a bit of time for it bud. Nice list of expensive jobs to get on with.
Re: trotters sammy... the never ending project...
Posted: Sun Oct 20, 2013 5:11 pm
by trotter
Yea its been sat there getting lonely for too long, fingers crossed it will be sorted soon then next time I will be able to come laning with everyone
Re: trotters sammy... the never ending project...
Posted: Tue Oct 29, 2013 7:27 pm
by trotter
quick update
the engine turned over and even ran for a little bit earlier so with a bit of fine tuning this weekend hopefully i can be otr mid nov
Re: trotters sammy... the never ending project...
Posted: Tue Oct 29, 2013 7:54 pm
by Jordi
Re: trotters sammy... the never ending project...
Posted: Wed Oct 30, 2013 9:09 am
by twiss
Wooo good to hear you're aiming for mid nov!!! Sorry again about stealing your alternator
Re: trotters sammy... the never ending project...
Posted: Wed Oct 30, 2013 9:53 pm
by trotter
Ha no worries twiss, it made me pull my finger out and get a bigger one so it will work with my winch