Page 6 of 43
Re: Dans Zook Build BIG UPDATE!
Posted: Mon Nov 14, 2011 9:56 am
by ScottieJ
Nice one Dan, now get that Body back on!
think you are overtaking me now, I just haven't had the time on mine recently.
It's going to look good in that colour
Re: Dans Zook Build BIG UPDATE!
Posted: Wed Nov 16, 2011 6:06 pm
by dan_2k_uk
Had a bit of time after work so got the engine and gearbox mated. Dunno why people pay for an adaptor plate. Its like they were made for each other. Suppose the truth will be seen when the starter dosent engage properly
Dan
Re: Dans Zook Build BIG UPDATE!
Posted: Thu Nov 17, 2011 9:14 am
by ROBBIE
if the starter dosnt engage just loosen of the bolts and twist the box a bit and try again. its what ive had to do every time
Re: Dans Zook Build BIG UPDATE!
Posted: Thu Nov 17, 2011 9:19 am
by ScottieJ
You do need to grind the starter or the block really, you won't be able to see it but if you don't it will not sit flush to the gearbox causing the teeth on both the starter and flywheel to not mesh properly and damage the teeth.
Re: Dans Zook Build BIG UPDATE!
Posted: Thu Nov 17, 2011 9:48 am
by dan_2k_uk
The starter ive got is really skinny. Seems to clear it by loads. Will be carefull though.
Re: Dans Zook Build BIG UPDATE!
Posted: Thu Nov 17, 2011 11:32 am
by ScottieJ
dan_2k_uk wrote:The starter ive got is really skinny. Seems to clear it by loads. Will be carefull though.
aha If you have a skinny starter then all is good! you only need to grind the starter/block f you have a fat one
Re: Dans Zook Build BIG UPDATE!
Posted: Tue Nov 29, 2011 5:39 pm
by dan_2k_uk
Got a bit to update.
Been working nights so getting a few hours in most afternoons once I prise myself out of the bed!
Dunno whats happened to the weather but its turned my garden into Glastonbury!
Sorry that most of the photos are in the dark but I've been finishing things late and wet!
Engine and gearbox on the chassis along with just about everything else
Cherry bomb I got of Scottie which needs a little work
Tacked up
Finished (Thought about high temp paint but the tail pipe is still shiny so Fook it!)
How it sits
This looks rather silly as the way the chassis is sat it is flexing slightly and the suspension will settle loads (I hope) as it never used to sit this high! If not its time for 33's!!!
Got the doors and windscreen into the gazebo to strip and then gunna take them and paint in my dads garage as its getting a bit damp and cold for painting outdoors so hope to have it fully waterproof by the end of the week and put the roof back on it while I finish the front clip and bonnet!
The tarp blew off it last night so its now full of water!
Dan
Re: Dans Zook Build Updated 29/11
Posted: Tue Nov 29, 2011 8:12 pm
by ROBBIE
great use for gas bottles
its lookin good mate soon be finished
Re: Dans Zook Build Updated 29/11
Posted: Tue Nov 29, 2011 8:22 pm
by dan_2k_uk
Ha ha. Yeah thats all those little hobby bottles are good for.
Re: Dans Zook Build Updated 29/11
Posted: Wed Nov 30, 2011 4:50 pm
by dan_2k_uk
Bollocks
That is all!