Suzuki sj 410 from Cornwall PROJECT Never Ending Project

turbo-tom · Post by **turbo-tom** » Fri Nov 01, 2013 7:08 pm

just made me think about the thread with the cat's in the exhaust!

dazerede · Post by **dazerede** » Wed Dec 04, 2013 5:36 pm

Not much of a update just showing you what my sj looks like at this current time

dazerede · Post by **dazerede** » Wed Dec 11, 2013 9:13 pm

2 inch calmini lift kit : )

I have fitted the lift kit on.the rear of my zook but the shocks arnt long enough so I will take the shalckles of and use the standard shackles for a minute untill I can afford new shocks and brake hoses

Also before I started I said to my self use the better spring on.the drivers side and use the spring that is leas curved on the passenger side but I got carried away and Naw my zook is leaning to.the drivers side

So I may fit the front springs next week and don't use the shackel reverse kit for a minute not sure yet

dazerede · Post by **dazerede** » Sun Dec 29, 2013 9:10 pm

Axle breathers are done and are in a good place out of the way

dazerede · Post by **dazerede** » Fri Jan 17, 2014 5:36 pm

Another little update made some rock sliders and also made my doors easier to take off

dazerede · Post by **dazerede** » Tue Feb 25, 2014 2:34 pm

havnt been on here for a while been busy

calmini lift kit fitted with all round pro comp es3000
with llama 4x4 3" longer brake hoses

rollcage bolted on wuith spot lights fitted

also got a rocklobster transfer box

kiwizook · Post by **kiwizook** » Tue Feb 25, 2014 6:21 pm

very nice! some good work went into that. how are the rock sliders attached to the chassis? make sure the rock sliders are strongly built and attached, as this is now really part of your roll cage. also, are you going to add some front brush bars type of thing? would think that would look quite good.

dazerede · Post by **dazerede** » Tue Feb 25, 2014 10:05 pm

Ye I have welded a spreader plate on the chassis rail and then welded the rock slider to that I made sure I took my time on preparing the metal
I will make the rest of the cage e.g to the front bumper and the back bit

Just bought a new clutch kit as the release bearing is making a very Loud noise and have to turn of engine to get it in 1st and reverse gear lol

andyrew · Post by **andyrew** » Tue Feb 25, 2014 10:26 pm

Love this little 410 but ....... was you drunk when you cut the hinges?

dazerede · Post by **dazerede** » Wed Feb 26, 2014 1:21 pm

Ye I love it aswell I will never sell it

Um it looks better once I covered it in blue paint lol

Got to fit a new clutch kit this week as the release bearing is screaming and I can't get in 1st gear when engine is running lol

Suzuki Club UK

Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: Suzuki sj 410 from Cornwall PROJECT Never Ending Project

test