Re: sj 413 unusual project
Posted: Thu Apr 25, 2013 8:25 am
Good stuff. Always liked the mini body swaps but thought they sat too high off the chassis. Sounds like you want it lower so this should turn out nice.
Suzuki Club UK
Home of all things Suzuki 4x4
https://suzukiclubuk.co.uk/forum/phpBB3/
sj 413 unusual project
https://suzukiclubuk.co.uk/forum/phpBB3/viewtopic.php?t=6957
Page 5 of 6
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 9:00 am
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:12 pm
sorry ive been busy lately but we have got some more done.
weve cut out the transmission tunnel and firewall out of the old shell.
and cut the firewall out of the mini to mate them together.
by doing this were going to keep all the standard pedals steering and connections so it should mean almost everything will fit and work reliably when its finished.
we have got it all cut and matched to fit properly.
also we have the firewall tacked in place and have built and shaped a new floor pan in the drivers side,which is also tacked in place now.
unfortunately this is the only photo i have of it in place
also picked up a full 2 piece fiberglass front end which was a similar price to the front panel that we needed.
weve cut out the transmission tunnel and firewall out of the old shell.
and cut the firewall out of the mini to mate them together.
by doing this were going to keep all the standard pedals steering and connections so it should mean almost everything will fit and work reliably when its finished.
we have got it all cut and matched to fit properly.
also we have the firewall tacked in place and have built and shaped a new floor pan in the drivers side,which is also tacked in place now.
unfortunately this is the only photo i have of it in place
also picked up a full 2 piece fiberglass front end which was a similar price to the front panel that we needed.
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:14 pm
Wow man looking nice n tidy cant wait to see it finished! you decide what colour you going to paint it? 
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:18 pm
the current plan is to paint it in fluorescent orange paint,partly because it look cool,and partly because i have a gallon of it in the garage lol
also if you look carefully at the pictures you will see how low it is now sat on the chassis rails
also if you look carefully at the pictures you will see how low it is now sat on the chassis rails
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:21 pm
noticed how low it looks much better! and orange paint? say no more! 
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:42 pm
Awesome,
Love the look of this,
Ian
Love the look of this,
Ian
Re: sj 413 unusual project
Posted: Sat Apr 27, 2013 11:53 pm
This is going to look fantastic!
Re: sj 413 unusual project
Posted: Sun Apr 28, 2013 9:17 am
Looks good
Ye go for the Orange paint
I think the gearstick might be a liltle to high and a little to far back but that's me
Ye go for the Orange paint
I think the gearstick might be a liltle to high and a little to far back but that's me
Re: sj 413 unusual project
Posted: Sun Apr 28, 2013 11:29 pm
the gearstick/pedals are in the position they would be in on a standard sj,they are all too far back for a mini so the seat will be mounted too far back for a mini.
it was either move the seat back or try to squeeze the pedals in a very small foot well so we went for the option which would keep the drive-ability and comfort.
its a compromise we are willing to make.
it would have been different if we hadnt decided to drop the shell onto the chassis as far as we have but we think its more important to have it sitting right and looking right on the outside then it is to have the driving position in the standard mini place
also the paint isnt just orange its industrial fluorescent orange safety paint.i also have a gallon of white base coat to bring out the brightness of the colour,and i have a gallon of fluorescent yellow paint aswell lol
it was either move the seat back or try to squeeze the pedals in a very small foot well so we went for the option which would keep the drive-ability and comfort.
its a compromise we are willing to make.
it would have been different if we hadnt decided to drop the shell onto the chassis as far as we have but we think its more important to have it sitting right and looking right on the outside then it is to have the driving position in the standard mini place
also the paint isnt just orange its industrial fluorescent orange safety paint.i also have a gallon of white base coat to bring out the brightness of the colour,and i have a gallon of fluorescent yellow paint aswell lol