Page 5 of 6
Re: Newtomud's Newtobuild
Posted: Thu Apr 19, 2012 6:36 pm
by Newtomud
Keeping it Suzuki
and looking for something different..
- Fuel tank 001.JPG (718.36 KiB) Viewed 7427 times
Re: Newtomud's Newtobuild
Posted: Thu Apr 19, 2012 7:47 pm
by Edweird
What is that?
Re: Newtomud's Newtobuild
Posted: Thu Apr 19, 2012 8:23 pm
by turbo-tom
old "skool" petrol tank by looks?
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 9:41 am
by ROBBIE
outboard motor tank?
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 6:36 pm
by Newtomud
ROBBIE wrote:outboard motor tank?
Top marks Robbie.. 5.3 gallons genuine Suzuki.. Brand new "old stock".. Comes with filler,breather and fuel gauge.. Has the handles on the side to strap it down with. Just need to work out what to do about the return fuel feed.
I'm quite pleased with it cause it's a bit different.
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 6:49 pm
by ROBBIE
Newtomud wrote:ROBBIE wrote:outboard motor tank?
Top marks Robbie.. 5.3 gallons genuine Suzuki.. Brand new "old stock".. Comes with filler,breather and fuel gauge.. Has the handles on the side to strap it down with. Just need to work out what to do about the return fuel feed.
I'm quite pleased with it cause it's a bit different.
used to have 1 and the motor it was connected too
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 7:04 pm
by turbo-tom
regard the fuel return pipe , you can either block it off i wouldnt exactly recomend it though , or apparently you can put a t peice in it but im not sure how that word work
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 7:13 pm
by Newtomud
I'm new to this but thought that maybe a "T" back into the feed fuel pipe would just suck the petrol back towards the carb?
Re: Newtomud's Newtobuild
Posted: Fri Apr 20, 2012 7:30 pm
by turbo-tom
in a way it probably would but if petrol is going back up to the carb it would go into the engine and burn etc , but it might flood the engine im not 100% sure sorry!
Re: Newtomud's Newtobuild
Posted: Tue Jan 22, 2013 8:20 pm
by Newtomud
Made a new rear bumper from 100x100x5mm box section with inset 90 lights..
Only had an electric drill and a metal file.. so took some time.