Page 31 of 43
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 2:30 pm
by twiss
Ahhh its all to technical for me... grind them off and sledgehammer them back on
Sometimes I use a press if Im feeling fancy haha
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 2:35 pm
by dan_2k_uk
turbo-tom wrote:quality! Always a bonus when you can use the firms gear.
And time..... and bearings..
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 2:48 pm
by turbo-tom
Haha thought it was the bearings but wasnt going to say much haha
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 4:17 pm
by ScottieJ
did you remember the 4mm spacer?
nice work!
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 4:35 pm
by dan_2k_uk
ScottieJ wrote:did you remember the 4mm spacer?
nice work!
They both had spacers hiding under the gunk.
Work gets bearings for £3 a pop.
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 4:38 pm
by ScottieJ
dan_2k_uk wrote:ScottieJ wrote:did you remember the 4mm spacer?
nice work!
They both had spacers hiding under the gunk.
Work gets bearings for £3 a pop.
What brand is that, might buy a load through you
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 4:41 pm
by dan_2k_uk
SKF or Timken mainly. Depends what the supplier had when the bearing store was re-stocked.
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 6:47 pm
by Anton
ScottieJ wrote:dan_2k_uk wrote:ScottieJ wrote:did you remember the 4mm spacer?
nice work!
They both had spacers hiding under the gunk.
Work gets bearings for £3 a pop.
What brand is that, might buy a load through you
This is going to sound cheeky, but any chance of getting some in for me too if you do that?
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 8:40 pm
by dan_2k_uk
Might be able to get some. Need to speak to the guy that orders stuff.
On a unrelated but totally awesome note I bought a item powered by compressed air thats made by a company called ARB today!
Re: Dan's Suzuki Samurai build - On hold till I build a new
Posted: Mon Jul 01, 2013 8:43 pm
by Jordi
Tyre inflator?