Page 26 of 42

Re: Project KJA

Posted: Sat Jan 11, 2014 12:04 am
by ianedwards
Yea I like the black one.. But the holes don't line up with the front end any more and I'm not fussed on the Santana part lol. So I'm going black with the newer one.

Spent the morning on the thing again, fan system is all wired up and should now come on when she gets warm. Relays even got its own little home, with a spare relay for front spots in the future.
image.jpg
image.jpg (746.53 KiB) Viewed 6238 times
Put a few pipes on,
image.jpg
image.jpg (809.9 KiB) Viewed 6238 times
Oh forgot - found a decent bonnet just up the road from me, needs a rub down and paint and can go strait on, tidy.

Put the throttle cable in and some things happened it's now to short, so will have to buy a new one. - bugger.

:thumbup:

Re: Project KJA

Posted: Sat Jan 11, 2014 12:55 am
by dan_2k_uk
Black grille crew :thumbup:

Re: Project KJA

Posted: Sat Jan 11, 2014 8:56 am
by trotter
For throttle cable I used a mountainbike rear brake cable if that's any help

Re: Project KJA

Posted: Sat Jan 11, 2014 7:33 pm
by ianedwards
Tidy, nice idea. the actual body is good, just the cable is too short and damaged. :thumbup:

Re: Project KJA

Posted: Sat Jan 11, 2014 10:01 pm
by donkeychomp
Where did the little braided hose come from? I like that!

Re: Project KJA

Posted: Sun Jan 12, 2014 3:20 pm
by ianedwards
eBay, I bought a length of it, I used it for the fuel lines on the back end and had some spare so used it for that.

Re: Project KJA

Posted: Sun Jun 01, 2014 8:25 pm
by ianedwards
Little update -

Winch rope in, there is a plate missing that I forgot to paint lol
Winch Rope in - May notice a gap, there is a plate to go on, waiting for paint to dry - forgot to paint it lol
Winch Rope in - May notice a gap, there is a plate to go on, waiting for paint to dry - forgot to paint it lol
image.jpg (1.93 MiB) Viewed 5944 times
And ..…...............Wahoooooo







Click Here for Youtube Video



Before any one says any thing, Private Road

Re: Project KJA

Posted: Sun Jun 01, 2014 8:27 pm
by twiss
I fixed the video for you ;)

Re: Project KJA

Posted: Sun Jun 01, 2014 8:43 pm
by ianedwards
Nice, I can never get it right lol

Re: Project KJA

Posted: Sun Jun 01, 2014 10:52 pm
by ianedwards
More of an update of today,

Put new yellow nice winch rope on rear winch,

Filled brake system,

Put pin in brake peddle,

Bled brake system , easy for now cos its all new

Took for first drive - wicked

Clutch not right ?

Put bolt back in peddle box to adjust clutch peddle hight,

Better but clutch slipping,

Found no more adjustment on clutch cable ?

Never mind - extend clutch cable bracket by 40mm

Test - now everything is spot on.. Tidy

Love the gear box - click - click - click - nice

Still might have to consider smaller seats - still awkward

Play around for a while with a big smile :)

Then make these and turn the garage green, here's a tip if you ever do it / wear a MASK.
image.jpg
image.jpg (962.21 KiB) Viewed 5925 times