Page 24 of 43
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Jan 25, 2013 8:05 pm
by ScottieJ
Are the 5spokes 8" wide then? I am gonna go 35 myself eventually but might go 35x10.50 as I've always had wide tyres so wouldn't mind trying some thinner ones
dunno though was contemplating my buckshots going on the LWB
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Jan 25, 2013 8:09 pm
by dan_2k_uk
yeah they are 8" wide. I want to try wider even tho I've watched you float a few times when I've still had some penetrating bite!
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Jan 25, 2013 8:24 pm
by Jordi
I'm hoping going from 31" ATs to 33" MTs won't be too bad. Think the more aggressive tread with partially offset the extra width and floating.
Which tyres are you thinking about Dan? From those posts presume you're going for 10" wheels?
Cheers
Jordi
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Jan 25, 2013 8:38 pm
by dan_2k_uk
Dont really know yet. Just wanna get the springs fitted and see where it sits....
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 12:30 am
by dan_2k_uk
4 inch lifted YJ springs!
At my house ready for a good clean up before I find time to start building the kit to fit them
Considerably bigger than I thought!
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 5:48 pm
by Jordi
4" of lift and virtual. Get some big boots under that Dan.
My 33s will be going on with virtual lift and 1.5" springs. Clearance at the back wont be a problem. Front should be ok, cut lots out. If not it'll be Mr Angry again.
You going for a custom job? Homebrew brackets and stuff?
Not sure what access you have to machine shop equipment. I can tell you i'm awfully jealous of those that have access. Parts other can fab and machine. I have to pay top dollar for!
Need to make good friends with someone at a fabricators / machine shop fast!
Bring on the build photos!
Jordi
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 6:57 pm
by trotter
most guys who work in the industry are quite happy to make stuff out of hours for a bit of cash etc, so def worth asking around jordi
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 7:24 pm
by dazerede
them sprigs look epic mate
what price did u get them 4 i know they are secound hand
as i need to get new springs in a year or 2 but not sure what to go for
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 7:31 pm
by dan_2k_uk
£230 plus the fuel to collect em. They are actually brand new but been sat under his truck for a while so quite a bit of surface rust.
Got lathe, mill, bandsaw, few pillar/radial drills, bench grinders, and 2 welders in the workshop at work. So hope to make most of the kit in spare time at work.
Re: Dans Zook Build - Lift going up, mind the doors!
Posted: Fri Feb 01, 2013 7:36 pm
by dazerede
aww wat that seems a bargin but still u have to make mounts for them