Ed's wagon

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Fri Dec 21, 2012 2:20 pm

andyrew wrote:looking good ed, how the ride now with the new springs?

i lowered mine down from an add a leaf to brand new standard height springs, so much nicer to drive.


one thing i would say tho........... give that sj a bath and a good wax!!! :poke:
The ride is better than before. The springs rebound much more quickly and it doesn't bounce and wallow around as much as it did before.

I know she needs a good wash, but it's cold outside and I'm a lazy bugger. Plus the dirt disguises the rust a bit.... :oops:
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Mon Jan 14, 2013 1:51 pm

I swear my bad luck is going to kill me one of these days. :argh:

A little bit of snow fell last night and I like to take photographs of snowy landscapes. On the way back from Uni at about half 12, I pulled over in a couple of field entrances to snap a few. The last one I stopped at, I slowed down, pulled up with my SJ to the side of the field entrance and got out, handbrake on and everything as you would. I'd walked round and had taken a couple of pictures when I hear my truck side forwards.

Turns out the passenger side wheel was on the edge of a rut and so she slid into it. Because I'd parked over to one side out of the way she slid into a little tree. The bull bar stood up to it, thankfully, but the bumper folded like paper. :cry:
2013-01-14 13.33.21.jpg
2013-01-14 13.33.21.jpg (1.54 MiB) Viewed 5620 times
SO, anyone got an SJ front bumper they could post me? :roll:
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Ed's wagon

Post by Jordi » Mon Jan 14, 2013 1:54 pm

Again, might have one. If i do i'll be in scunthorpe in mid feb sometime? Again like i told dunnin. I need to check.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Mon Jan 14, 2013 2:01 pm

Jordi wrote:Again, might have one. If i do i'll be in scunthorpe in mid feb sometime? Again like i told dunnin. I need to check.

Jordi
If I haven't got one by then, that would be awesome. :D
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Mon Jan 21, 2013 4:27 pm

Still can't get hold of a bumper. I've tried about half a dozen people breaking SJs on eBay now.

Did you have any luck finding one in your spares Jordi?
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Ed's wagon

Post by dan_2k_uk » Mon Jan 21, 2013 4:53 pm

I jumped out to take a photo once and heard my handbrake bang and watched my truck career down a hill backwards through some trees and into a river with my mate sat in the passenger seat.

His face was priceless and according to him so was mine.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Ed's wagon

Post by Jordi » Mon Jan 21, 2013 5:20 pm

Haven't had time to check yet. Was busy bodging mine up. I'll try and make it a priority for saterday.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Mon Jan 21, 2013 5:25 pm

dan_2k_uk wrote:I jumped out to take a photo once and heard my handbrake bang and watched my truck career down a hill backwards through some trees and into a river with my mate sat in the passenger seat.

His face was priceless and according to him so was mine.
Sorry, but that made me nearly wet myself. The fact that he was still in it.

I know a woman who drove an old 318 E36. Basic model, worn out and had to be bullshitted through it's MOTs. She plays trumpet for an orchestra and one night she was playing at a pantomime in Lincoln; "The city on the hill." She parked her beamer outside and five hours later when she came back out it was 50 yards away, tangled in some steel railings.

She drove it away as well, bumper hanging off and her tail lights buggered in the dark. :screwy:
Patched it up with a bumper and lights from a scrapper for next to nothing and it went through one more MOT before it threw a rod. :hahaha:

And thanks Jordi, that'd be awesome.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

chrisj410
Can I have a tow
Can I have a tow
Posts: 362
Joined: Wed Sep 01, 2010 5:36 pm

Re: Ed's wagon

Post by chrisj410 » Mon Jan 21, 2013 5:41 pm

Ah man thats a shame :(
Im pretty sure I've got one
Ill check tomorrow bud

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Ed's wagon

Post by Edweird » Mon Jan 21, 2013 7:32 pm

chrisj410 wrote:Ah man thats a shame :(
Im pretty sure I've got one
Ill check tomorrow bud
Thanks
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

Post Reply