Project KJA

[dan_2k_uk]

Cant wait. Keep it up dude!

[OllieSJ]

This is the lid you were after

[babakev]

hi

looks like a bit of work uve got there.

regarding the body mounts. a couple of mine were stuck and a good ammount of wd40, lifting it up and down, jacking it up and down, and twisting the metal parts with a big set of mole grips did the trick.

let me know if you find some body mount rubbers. the only ones i could find with a quick search were from thailand and quite expensive.

Dan

I brought 2" Body mount rubbers on Ebay uk a few months ago for £8. & not got round to fitting them yet !

[ianedwards]

hi,

cheers but i managed to save the old ones, it was the metal dome things that had rotted so i made new ones and the tube inserts, rubbers will last a bit longer.

this is the lid thats broken, an inch holding it on lol

lid

IMG_0184.JPG (1.48 MiB) Viewed 5624 times

lid

IMG_0185.JPG (1.73 MiB) Viewed 5624 times

front end, welded up and started painting

IMG_1189.JPG (1.89 MiB) Viewed 5624 times

inside painted, didnt do it all, just the bits that needed it

IMG_1191.JPG (1.72 MiB) Viewed 5621 times

just painted the bits ive worked on and that you will see, bit more to do on the rear floor

IMG_1193.JPG (2.14 MiB) Viewed 5624 times

inside of front end painted and all on and bolted up in its last resting place, just got to rub down and paint the out side and putting the new rad in

IMG_0186.JPG (1.71 MiB) Viewed 5624 times

IMG_0187.JPG (2.31 MiB) Viewed 5624 times

its coming along

IMG_0189.JPG (1.85 MiB) Viewed 5624 times

new hawse and plate to cover my dads hole he cut

IMG_0190.JPG (1.6 MiB) Viewed 5624 times

and then comes the new winch rope for the rear winch, i liked the yellow one

IMG_0182.JPG (1.46 MiB) Viewed 5624 times

in process of cleaning and painting, need to find a badge or something to cover the old indicator holes

IMG_1195.JPG (1.75 MiB) Viewed 5624 times

Hope you like,

Cheers

Ian

[OllieSJ]

Good work. If you need the lid you know were i am

[donkeychomp]

Got these if you can use them...

[ianedwards]

Cheers, is it the same lid ? if it is ill have it off you.

Like the badges, shame it don't say 413. I'm thinking of putting a black and white Union Jack enamel badge Ive seen there.

Ian

[kiwizook]

very nice work man. this is the standart I had in mind for my 410k a long time ago, has all gone out the window as I thought it was impossible, you might yet change my mind, as I see it is possible, but I'll have to upskill first

[OllieSJ]

Cheers, is it the same lid ? if it is ill have it off you.

Like the badges, shame it don't say 413. I'm thinking of putting a black and white Union Jack enamel badge Ive seen there.

Ian

yer only thing i have noticed is that as my dash is slightly faded the colour doesnt match any way its the same 99.9 % sure if not i will pay for postage back some how.

[Jordi]

More tidy work Ian. Front end looks spot on.

Looling forward to seeing this on the road.