1991 Santana Samurai

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
tomcat
Engaged 4wd low
Engaged 4wd low
Posts: 219
Joined: Wed May 04, 2022 6:59 pm

Re: 1991 Santana Samurai

Post by tomcat » Tue Nov 26, 2024 4:59 pm

Purchased a 7" lamp mounting set [usually for Mini, MGB et., which needed to be modified for the Samurai.
20241126_105736.jpg
Cut the shell with a Dremel as near to the support ring as I could and then ground the edge down till almost flat.
Top
User avatar
tomcat
Engaged 4wd low
Engaged 4wd low
Posts: 219
Joined: Wed May 04, 2022 6:59 pm

Re: 1991 Santana Samurai

Post by tomcat » Tue Nov 26, 2024 10:50 pm

First stage, located outer ring positions for beam adjustment screws. 12mm diameter holes required. There are in addition 4 No fixing points.
After much measurement, remeasure, relocation drilled holes in stages, 3, 5, 8, 10mm and finished off with a file.
20241126_110029.jpg
Top
Post Reply

Return to “Builds and Projects”