Page 15 of 20

Re: suzuki steve's 410 build

Posted: Mon Aug 05, 2013 8:50 pm
by suzukisteve
yeah the electric tape is a good idea Scott ill give it a bash!

Re: suzuki steve's 410 build

Posted: Mon Aug 05, 2013 8:56 pm
by Jordi
I used synthetic enamel gloss from my local paint place. Stood up to the wiltshire hedges ok and never came off when i pressure washed it.

Re: suzuki steve's 410 build

Posted: Sat Aug 10, 2013 12:01 am
by suzukisteve
not much action at the moment im afraid as im off to the lake district tomorrow morning (unfortunately not in the zuke). so I thought id put a pic up of the sticker I just put on the bonnet instead

Re: suzuki steve's 410 build

Posted: Thu Aug 15, 2013 6:36 pm
by suzukisteve
im on holiday uo north at the mo (without the zuke :bawling: ) but im still thinking of the next steps to take.

needs a good steam clean and underseal as half of whiltshire is still hanging on for dear life underneath. i can get it all done properly for around the 50 quid mark so thats cool. also gotta wire up the front spots and sort out a rear one as well.

could do with a lick of paint inside for a bit of protection as well if im honest.


some time next month ill be getting my 5 speed g/box and fwhs (thanks to the combined efforts of andyrew and scottie. cheers lads!) so ill chuck and clutch in at the same time as well.

there are a few little bits and pieces that need doing and tidying up but its all good fun!

cant wait to get cracking! :rockin:

Re: suzuki steve's 410 build

Posted: Wed Aug 28, 2013 3:17 pm
by suzukisteve
while I had two mins :thumbup:

Re: suzuki steve's 410 build

Posted: Wed Aug 28, 2013 3:44 pm
by Edweird
I can't decide if that's great or terrible!

Re: suzuki steve's 410 build

Posted: Wed Aug 28, 2013 3:46 pm
by suzukisteve
im not sure yet either. its a bit of an experiment really to see how it goes. good fun tho :thumbup:

Re: suzuki steve's 410 build

Posted: Wed Aug 28, 2013 4:25 pm
by turbo-tom
Looks good I think :D

Re: suzuki steve's 410 build

Posted: Wed Aug 28, 2013 9:52 pm
by Jordi
I like it. Just hope the paint doesn't burn off.

Re: suzuki steve's 410 build

Posted: Thu Aug 29, 2013 8:13 am
by suzukisteve
yeah ive given it s good hoon to warm it up. seems to be holding well but I think time will tell on this one.

I done a few other bits last night in prep for the next day out.

diff oils changed. they weren't overly bad if im honest. a little murky but ive seen worse. u also chucked a moly slip in for good measure :thumbup:

next was a nice oil and filter change as it was slightly overdue.

then came the cibie oscars I fitted a while ago. all wired up and a nice heavy duty switch just above the fog light switch.