virtual lift help :)

fitting new seats? welding up arches? Painting your SJ? post your queries here
Post Reply
User avatar
hamer
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon Jul 23, 2012 8:06 pm
Location: bridgend

Re: virtual lift help :)

Post by hamer » Mon Sep 23, 2013 9:23 pm

Il take a pic tomoz...
Iv cut alot I guess lol I went with upper grove and cutt to suit the outer so its pritty much plum
I still have the upper bolt ther and I aint welded up the bulkhead yet as my mate is weldin up some wheels for me
I couldnt find 16" suzuki wheels with a good offset il have them tomoz im hopeing
Supose I could weld the lower nut bsck in place lol
Top
User avatar
hamer
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon Jul 23, 2012 8:06 pm
Location: bridgend

Re: virtual lift help :)

Post by hamer » Tue Sep 24, 2013 7:17 pm

Hmmm think I over done it lol
Attachments
20130924_191343.jpg
20130924_191343.jpg (1.75 MiB) Viewed 5820 times
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: virtual lift help :)

Post by ROBBIE » Tue Sep 24, 2013 8:26 pm

Wow that is some hole :lol:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
hamer
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon Jul 23, 2012 8:06 pm
Location: bridgend

Re: virtual lift help :)

Post by hamer » Tue Sep 24, 2013 8:39 pm

ye think i be welding half of it back on lol
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: virtual lift help :)

Post by dan_2k_uk » Tue Sep 24, 2013 8:50 pm

I would just go with the flow now.

You dont need anywhere near all the standard pedal travel (atleast not for the SU anyway) so if you bolt it back on at a slight angle you will probably be able to space it off or adjust the stoppers to get it somewhere you are comfortable with and still have full throttle travel.

One thing I can promise you is you will have enough bulkhead clerance!
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
hamer
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon Jul 23, 2012 8:06 pm
Location: bridgend

Re: virtual lift help :)

Post by hamer » Tue Sep 24, 2013 8:53 pm

dan_2k_uk wrote:I would just go with the flow now.

You dont need anywhere near all the standard pedal travel (atleast not for the SU anyway) so if you bolt it back on at a slight angle you will probably be able to space it off or adjust the stoppers to get it somewhere you are comfortable with and still have full throttle travel.

One thing I can promise you is you will have enough bulkhead clerance!
haha i hope so lol
il post some pics up wen it sorted :)
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: virtual lift help :)

Post by ROBBIE » Tue Sep 24, 2013 10:16 pm

I think I got lucky when I did mine,done passenger side first and when I got to drivers it worked out that I had cut about half inch lower than the captive nuts
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
hamer
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon Jul 23, 2012 8:06 pm
Location: bridgend

Re: virtual lift help :)

Post by hamer » Tue Sep 24, 2013 11:12 pm

ROBBIE wrote:I think I got lucky when I did mine,done passenger side first and when I got to drivers it worked out that I had cut about half inch lower than the captive nuts
in my defence it was grinding out in the rain so was in a mad rush trying not to get electicuted wilst holding an angle grinder locked on full speed
this is what happend last time it escaped my hands lol
Attachments
1071102_10151489936146481_194702996_o.jpg
1071102_10151489936146481_194702996_o.jpg (509.75 KiB) Viewed 5794 times
Top
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Re: virtual lift help :)

Post by Ladaman » Tue Sep 24, 2013 11:18 pm

ROBBIE wrote:I think I got lucky when I did mine, I had cut about half inch lower than the captive nuts
HALF AN INCH LOWER than captive nuts, not in line with them!!

:hahaha: :hahaha: :hahaha:
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: virtual lift help :)

Post by ROBBIE » Wed Sep 25, 2013 9:40 am

Ladaman wrote:
ROBBIE wrote:I think I got lucky when I did mine, I had cut about half inch lower than the captive nuts
HALF AN INCH LOWER than captive nuts, not in line with them!!

:hahaha: :hahaha: :hahaha:
Well I'm just glad I didn't try to grind my nuts :hahaha:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
Post Reply

Return to “Bodywork, Paint and Interior Trim”