Page 2 of 2

Re: Hallo guys!

Posted: Sun Jan 03, 2016 10:34 pm
by Anton
:welcome2:

Re: Hallo guys!

Posted: Mon Jan 04, 2016 3:05 am
by ScottieJ
The easiest way is to just use a 1.3 gearbox. It's a lot of work to fit the vitara gearbox and no cheaper because you need to convert the output of the gearbox to bolt up to the transfer box with a shortened propshaft. As Robbie says the transmission tunnel does also need a few tweaks but it won't be as extensive as mine unless you choose to spend a lot of money on a twin transfer box set up.

Re: Hallo guys!

Posted: Mon Jan 04, 2016 9:49 am
by Terrierman
Thanks a lot!
Ok! I get it!
Engine swap will be my last work. At the time i almost finished with electric problems and i started bodywork. :weld:

Re: Hallo guys!

Posted: Mon Jan 04, 2016 5:27 pm
by dan_2k_uk
Hi and welcome.

Just try it with the 410 engine and enjoy it. As long as your tyres aren't too big you can go have some fun.

Re: Hallo guys!

Posted: Thu Jan 07, 2016 2:43 pm
by Terrierman
Dan that i 'm going to do until to finish suspension and body works! ;)

Re: Hallo guys!

Posted: Fri Jan 08, 2016 12:30 am
by Anton
Pix of the wee beastie! We need pictures!

Re: Hallo guys!

Posted: Thu Jan 14, 2016 8:26 am
by Terrierman
This is from my first ride at the mountains

Re: Hallo guys!

Posted: Thu Jan 14, 2016 8:26 pm
by Anton
:rockin:

Re: Hallo guys!

Posted: Thu Jan 14, 2016 9:53 pm
by Tramp
Great photo - living the dream!