I don't really know I've not converted one myself... scottie will know!
Also, I don't know how much room you have in your winch bumper, but I was looking at getting a Champion 9500 Short Drum, as it is lighter weight than a big winch.
Downside is less line capacity, but its easy enough to keep a synth rope in the back of the zook!
They don't do the Champion 9500SD any more, but there is a Warrior Samurai (haha) S9500 short drum which is pretty similar
It is a shame it doesn't actually say samurai on it!
http://www.electricwinchshop.co.uk/warr ... -steel.htm
SJ410 -1985 'Cabrio', engine rebuild
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
- Attachments
-
- 9500_sd_samurai.jpg (38.9 KiB) Viewed 5091 times
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: SJ410 -1985 'Cabrio', engine rebuild
It's really easy to fit a servo... just need to enlarge the hole in the bulkhead and drill two new holes to mount the servo. And as Twiss says the 410 coil wont properly work with the electronic ignition so you need to swap it.twiss wrote:I don't really know I've not converted one myself... scottie will know!
Also, I don't know how much room you have in your winch bumper, but I was looking at getting a Champion 9500 Short Drum, as it is lighter weight than a big winch.
Downside is less line capacity, but its easy enough to keep a synth rope in the back of the zook!
They don't do the Champion 9500SD any more, but there is a Warrior Samurai (haha) S9500 short drum which is pretty similar
It is a shame it doesn't actually say samurai on it!
Twiss WARRIOR winches are Champion winches, they just re-branded them
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
Ahh right I thought as much, but wasn't sure
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: SJ410 -1985 'Cabrio', engine rebuild
Got a replacement windscreen fitted now. It literally fell in the hole, hope it doesn't fall out again. aha!
Then had a head-scratching moment. Can't remember how to plumb the carb in. Any ideas what is what? There are 11 hose take-off points on the carb and inlet...
Obvious ones are obvious. But not sure what the score is with the ones for the choke mech (I think that is what it is) on the side of the carb body.
Then had a head-scratching moment. Can't remember how to plumb the carb in. Any ideas what is what? There are 11 hose take-off points on the carb and inlet...
Obvious ones are obvious. But not sure what the score is with the ones for the choke mech (I think that is what it is) on the side of the carb body.
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
Standard aisin carb right?
Remember there should be 2 water connectors, 1 for vacuum advance, one for fuel in
Can't remember the rest off the top of my head...
Remember there should be 2 water connectors, 1 for vacuum advance, one for fuel in
Can't remember the rest off the top of my head...
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
Standard aisin carb right?
Remember there should be 2 water connectors, 1 for vacuum advance, one for fuel in
Can't remember the rest off the top of my head...
Remember there should be 2 water connectors, 1 for vacuum advance, one for fuel in
Can't remember the rest off the top of my head...
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
Darrell
- Suzuki, will you marry me?
- Posts: 2989
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
What's that Carb 
What's that manifold
Best of luck
What's that manifold
Best of luck
2005-GV 1600se, "Hell" What do I know!
Re: SJ410 -1985 'Cabrio', engine rebuild
I can only think that that must be from a G13 engined Swift
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
-
Darrell
- Suzuki, will you marry me?
- Posts: 2989
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: SJ410 -1985 'Cabrio', engine rebuild
Done this in case anybody can can help 
- Attachments
-
- Christ knows.jpg (271 KiB) Viewed 5032 times
2005-GV 1600se, "Hell" What do I know!