Samurai speedometer fault
Samurai speedometer fault
The speedo has stopped working on my Samurai because the output spigot on the transferbox which feeds the cable is not turning. I have looked at the driven gear and it seems ok. Driver gear worn? I cant see it well enough without gearbox strip down. But I cant think what else it could be. Has anyone else had this. Seems bad to have the easily replaceable gear tougher than the hard to get at gear.
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Samurai speedometer fault
Hello,
Have a look at the Build a Rocklobster guide here:
http://www.suzukiclubuk.co.uk/diy/16-tr ... ocklobster
There are pics on how to get the speedo drive out, not majorly difficult
Have a look at the Build a Rocklobster guide here:
http://www.suzukiclubuk.co.uk/diy/16-tr ... ocklobster
There are pics on how to get the speedo drive out, not majorly difficult
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."