OBD2

All tech relating to the newest bread of suzuki 4x4s
Nick40
Got muddy boots
Got muddy boots
Posts: 20
Joined: Sun Feb 23, 2014 1:51 pm

OBD2

Post by Nick40 » Fri May 16, 2014 2:32 pm

Hi Folks,

wonder if anyone can shed a bit of light on this slight problem, I have 2 codes coming up on my OBD" reader Po135 which I believe is the Lambda sensor in the exhaust manifold and another more baffling one which just reads N/A.

I have a very cheap and basic reader and I am guessing that the OBD2 is sending a fault that the reader can not translate unless anyone knows better.

My Jimny is a 2003 Andalucian job with a G13BB.

PS Does anyone know how difficult it is to swap the motor for a G16BB?

User avatar
timwilks13
SCUK Website Padawan
SCUK Website Padawan
Posts: 1248
Joined: Sun Feb 03, 2013 5:55 am
Location: Scarborough, soon to be Poland

Re: OBD2

Post by timwilks13 » Fri May 16, 2014 2:46 pm

Did you reset your codes before taking the readings? and if so have you been for a drive since doing so? I dont know anything about the jimny in particular im afraid but i had a similar issue with my dads C4, where i had 1 n/a code just because the car needed driving before scanning for error codes.
1986 SJ410 - Furry dice, new window winder.

10 kinds of people in this world, those who understand binary and those who dont.

if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.

User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:

Re: OBD2

Post by Rhinoman » Sat May 17, 2014 7:54 pm

Try another tool, most code readers will report a code even if its not an OBD2 mandated code. The list of enhanced codes is in the FSM.
G16B swap is fairly straightforward, have a look on Auszookers, there are a couple of threads there.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz

User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:

Re: OBD2

Post by Rhinoman » Sat May 17, 2014 7:57 pm

timwilks13 wrote:Did you reset your codes before taking the readings? and if so have you been for a drive since doing so? I dont know anything about the jimny in particular im afraid but i had a similar issue with my dads C4, where i had 1 n/a code just because the car needed driving before scanning for error codes.
If you reset the codes first then you won't be able to read them unless /until they reoccur. If a particular monitor has not completed then the ECU should report 'Not ready' rather than n/a.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz

Nick40
Got muddy boots
Got muddy boots
Posts: 20
Joined: Sun Feb 23, 2014 1:51 pm

Re: OBD2

Post by Nick40 » Tue May 20, 2014 9:18 pm

Thanks everybody all sorted now

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: OBD2

Post by donkeychomp » Tue May 20, 2014 10:05 pm

Glad it's sorted out...does 0BD2 know C3P0?
If it ticks over...leave it

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: OBD2

Post by ROBBIE » Tue May 20, 2014 11:09 pm

donkeychomp wrote:Glad it's sorted out...does 0BD2 know C3P0?
No that's ob1
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: OBD2

Post by Jordi » Tue May 20, 2014 11:14 pm

ROBBIE wrote:
donkeychomp wrote:Glad it's sorted out...does 0BD2 know C3P0?
No that's ob1
I'd of gone with R2D2
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: OBD2

Post by donkeychomp » Tue May 20, 2014 11:30 pm

Too obvious...
If it ticks over...leave it

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: OBD2

Post by Jordi » Tue May 20, 2014 11:32 pm

Ah well, as I've said before my knowledge of sci-fi starts and stops with Red Dwarf.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Post Reply