oil/grease springs ????

Post your questions about your suspension and steering problems here!
Post Reply
User avatar
jim tylee
Got muddy boots
Got muddy boots
Posts: 65
Joined: Sat Mar 29, 2014 4:59 pm
Location: croydon

oil/grease springs ????

Post by jim tylee » Sun Apr 13, 2014 10:28 am

Hi,
In the past i have used copperslip on the leaves...no weight on spring forcing them open a bit with a screwdriver and then forcing grease into leaves.....in there a less demanding way to oil these
as its quite a long task.....do not think wd40 sprayed onto outside would last long......
any ideas anyone
Jim
Top
User avatar
muddymesser
Engaged 4wd low
Engaged 4wd low
Posts: 189
Joined: Mon Jun 29, 2009 9:10 pm
Location: blackpool

Re: oil/grease springs ????

Post by muddymesser » Sun Apr 13, 2014 11:44 am

it all depends how involved you want to get . . . on mine i take the springs apart completly and give them a good going over with i wire brush and then paint them up so they are smooth and put abit of greese inbetween each leaf while putting them back together
Top
User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:
Contact twiss

Re: oil/grease springs ????

Post by twiss » Sun Apr 13, 2014 12:39 pm

Have you tried spray on PTFE lubricant? Could work...
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."
Top
User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:
Contact Darrell

Re: oil/grease springs ????

Post by Darrell » Sun Apr 13, 2014 12:50 pm

Don't waste your time, let the buggers rust :thumbup:
To be honest unless you put PTFE liners between the leafs it won't last 5 minutes.
Any oil just attracts dirt and dust and turns to grinding paste :thumbdown: .
2005-GV 1600se, "Hell" What do I know!
Top
User avatar
jim tylee
Got muddy boots
Got muddy boots
Posts: 65
Joined: Sat Mar 29, 2014 4:59 pm
Location: croydon

Re: oil/grease springs ????

Post by jim tylee » Sun Apr 13, 2014 12:50 pm

Might give that a try later this week
thanks jim
Top
User avatar
jim tylee
Got muddy boots
Got muddy boots
Posts: 65
Joined: Sat Mar 29, 2014 4:59 pm
Location: croydon

Re: oil/grease springs ????

Post by jim tylee » Mon Apr 14, 2014 3:42 pm

jim tylee wrote:Might give that a try later this week
thanks jim
Think i will give them a treat with Waxoyl ..have a high pressure sprayer in garage
JIM
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: oil/grease springs ????

Post by ScottieJ » Mon Apr 14, 2014 4:02 pm

Darrell wrote:Don't waste your time, let the buggers rust :thumbup:
To be honest unless you put PTFE liners between the leafs it won't last 5 minutes.
Any oil just attracts dirt and dust and turns to grinding paste :thumbdown: .
x2 on this! I wouldn't bother unless it was to add PTFE tape between the leaves.
Zuki Build

Steady as she goes!
Top
User avatar
ektoz
Engaged 4wd low
Engaged 4wd low
Posts: 153
Joined: Fri Apr 19, 2013 10:59 am
Location: Paphos, Cyprus
Contact:
Contact ektoz

Re: oil/grease springs ????

Post by ektoz » Mon Apr 14, 2014 4:27 pm

Darrell wrote:Don't waste your time, let the buggers rust :thumbup:
To be honest unless you put PTFE liners between the leafs it won't last 5 minutes.
Any oil just attracts dirt and dust and turns to grinding paste :thumbdown: .
+3 to that I have seen 30 year old landrovers here and they didn't do anything to the leafs
Don't grow up, it's a trap
My build thread:
http://www.suzukiclubuk.co.uk/forum1/vi ... hp?t=10402
Top
Post Reply

Return to “SJ series Suspension and Steering”