muddymessers build thread

[muddymesser]

well i bought it in 2007 as my first car i dont have the original picture but it was pretty much bog standard apart from GV alloys with 235 70 16 road tyres and a weber carb with a nice paint job (from what it seamed

if i knew what to look for rust wise i wouldn't of paid as much as i did for it, all the rust in the usual places so naturally it got a virtual lift as soon as i started welding it and the bonnet re sprayed matt black (bad paint job was removed via large sticker and the sun)

224193_10575702718_923_n.jpg (51.73 KiB) Viewed 9005 times

299_20976347718_1049_n.jpg (48.37 KiB) Viewed 9005 times

i ended up trying to stick the standard arches on in the new position and got a couple of lights on the winscreen hinge bolts (have been moved now)

330_25277752718_3831_n.jpg (38.05 KiB) Viewed 9005 times

[muddymesser]

i didnt like them so ended up getting some defender arches (about 3 month between buying fronts and rears) also bought a set of poly bushes and another set of springs (all 4 were rears i think) so i mixed n matched them to get a bit of lift from them and made a new front bumper from a landy series 3 bumper i was given and did some tread plate sill covers too

1977_43055092718_2539_n.jpg (59.14 KiB) Viewed 9003 times

next i made up some bolt on rock sliders and got my hands on some 215 15 colways on weller 15 by 7s for 40 quid and got my front arches done

2870_76482167718_7286683_n.jpg (66.57 KiB) Viewed 9003 times

313860_10151476702922719_2023266590_n.jpg (125.73 KiB) Viewed 9003 times

6420_25277957718_2177767_n.jpg (48.39 KiB) Viewed 9003 times

after that came a bit of a spruce up in the engine bay and on the dash

[muddymesser]

1

6420_103321817718_3074049_n.jpg (58.65 KiB) Viewed 9002 times

289_17328962718_7491_n.jpg (20.82 KiB) Viewed 9002 times

after a few month i was wandering around the scrappy and spotted these
235 85 16 mud tyres and i decided i had to have them 120pound later they were off the landy rims and on my alloys

6420_103321812718_1671106_n.jpg (59.41 KiB) Viewed 9002 times

6420_103321807718_1202872_n.jpg (63.72 KiB) Viewed 9002 times

had to have a play with flexing it to see if it caught and i think it got the bulk head so i took the axle off re drilled the perches and moved it forwards 20mm ish it caught the springs but i got wheel spacers much later

6500_110674822718_6247319_n.jpg (72.79 KiB) Viewed 9002 times

10419_128629057718_4189835_n.jpg (56.37 KiB) Viewed 9002 times

i then decided to have a go at making a rear tow point

[muddymesser]

then came a day i was bored so decided it needed removable doors

5540_126368482718_7450932_n.jpg (45.17 KiB) Viewed 9001 times

5540_126368497718_4829693_n.jpg (49.4 KiB) Viewed 9001 times

before it even got its mud tyres it had already passed its test . .. i hadnt tho

i had a few spare parts nocking about so i made up a snorkle for it out of a bit of large bendy hose and some alloy flue pipe off a boiler and made it fit through the side of the bonnet as it made more sense than cutting a hole in the wing

13344_175494792718_5500997_n.jpg (44.03 KiB) Viewed 9001 times

13344_175494762718_6622451_n.jpg (44.79 KiB) Viewed 9001 times

after that we moved house and got a work shop as we had set up a family bussiness and i started driving it around the industrial estate and private land for a bit

i decided the bumpers wanted changing up a bit so i welded a bar on the front bumper moved the standard lights into it and made some metal end caps for the rear from stainless (it use to be a catering light i found in a skip) even thought about covering the full rear bumper with it as it was almost a perfect fit over it also made up a new tank guard from a navara A bar cattle grid i was given

[muddymesser]

made up some new light guards for the rear from an only industrial fridge vent (from the skip )

268252_10150259855342719_917906_n.jpg (29.2 KiB) Viewed 8998 times

i then had more accessories that needed switches (sub, lights, cb, air horn, reverse light, immobiliser switch and soothing else) and the original clock was long gone by this point

971571_10151715481227719_1934314905_n.jpg (70.55 KiB) Viewed 8998 times

made up some eye brows to partly cover up the holes from my stupid green lights i fitted also i think they look cool

378573_10150372805477719_1201133543_n.jpg (119.14 KiB) Viewed 8998 times

i then moved back to my mums place and got a job that actually paid so i got a set of 32mm wheel spacers here a before n after

319102_10150373808662719_393364119_n.jpg (122.61 KiB) Viewed 8998 times

377451_10150373808812719_1197164889_n.jpg (105.02 KiB) Viewed 8998 times

no more catching on the springs so did a little work to her (only minor things like lights etc) and got her on the road in 2012

then at work the next day i found a rock

545113_10150968207527719_1598442097_n.jpg (64.17 KiB) Viewed 8998 times

then i found 2 rocks

601020_10150968206442719_1346750745_n (1).jpg (67.96 KiB) Viewed 8998 times

and then loaded up some friends and headed to garstang ford for a play

zook2.jpg (75.59 KiB) Viewed 8998 times

zook3.jpg (89.38 KiB) Viewed 8998 times

1517921_10152046301777719_508394376_n.jpg (25.91 KiB) Viewed 8998 times

then i drove her as she was for a while chasing my friends saxo go faster silver low thing down bumpy roads

and then i hit a speed bump at 40 and put my arse through my seat

asked on facebook and got some new seats off minimog(tristan) for 75 quid and gave my friends a lift near by the day i went to pick em up so i didnt need to pay for fuel

got home and had them fitted fairly easily on their own runners

564930_10150943601812719_1605847451_n.jpg (55.66 KiB) Viewed 8998 times

at some point i robbed a 12 ball off my mate so i made it my Tbox knob

535089_10150778947547719_1577236793_n.jpg (50.91 KiB) Viewed 8998 times

also i got fed up with my tyres catching the arches on bumps cos they werent wide enough so i bought some 'unbrakeable' defender +2 arches that suspiciously came in a box marked fragile (considered sending them back because of that)

so i got those on

389635_10150968204392719_200110365_n.jpg (86.14 KiB) Viewed 8998 times

suzuki5.jpg (65.5 KiB) Viewed 8998 times

no more catching now and very little rubbing offroad too

[muddymesser]

i started getting on better with my dad n went to work for him for a decent pay so i started doing alot of stickers etc so she got covered in them

i got a bit of a rattle on my 1.3 conveniently when a 1.6 8v engine came up for sale for 125 with a sj gear box and clutch . . . so i decided to buy that and get it fitted luckily i already had a skinny starter fitted the carb was junk so i decided to put my weber on it off the 1.3 . . . turned it over and a very loud bang and flames came out of the carb, ive never moved so fast in my life, i cleared a 50 foot work shop in the blink of an eye ducking under a car lift too

got that running spot on with just tweeking the carb and then went to my first pay n play and it really surprised me, no stalling on hills hardly got stuck where the disco on 33s i was following did and showed up alot more expensive 4x4s

487757_10151063848987719_1560300123_n.jpg (73.62 KiB) Viewed 8996 times

422274_10151054558102719_270003765_n.jpg (92.51 KiB) Viewed 8996 times

suzuki4.jpg (71.25 KiB) Viewed 8996 times

suzuki2.jpg (68.85 KiB) Viewed 8996 times

284143_10151184425197719_1016710808_n.jpg (68.85 KiB) Viewed 8996 times

after a while i noticed a dent in the bonnet where the bolt on top of the carb was digging in and starting to rub a hole so it got a bonnet scoop off a trooper for a tenner and a bunch of holes drilled in the bonnet under it to help keep it cooler altho it didnt really need it

45298_10151186002312719_1292455438_n.jpg (82.14 KiB) Viewed 8996 times

zook1.jpg (72.88 KiB) Viewed 8996 times

suzuki1.jpg (78.7 KiB) Viewed 8996 times

249448_10151186001952719_965639165_n.jpg (68.07 KiB) Viewed 8996 times

246715_10151186002642719_697410739_n.jpg (72.88 KiB) Viewed 8996 times

i then decided on doing a bit of a temp pick up to it so stuff stops falling under my seat only needed angle iron some inch n a bit box section and a sheet of 5 mm plastic all just glued and riveted in place . . . and had my sub mounted to it

149449_10151411904792719_1863969537_n.jpg (75.29 KiB) Viewed 8996 times

529413_10151411907412719_1148758697_n.jpg (42.4 KiB) Viewed 8996 times

my standard back box then blew up on the way to a car cruise so when i got back to work the next day i went to see the guys who were braking cars on the industrial estate i was working on and got this for 15 quid just because i needed something there n then

a big fooking jap drift cannon

521566_10151226709027719_1532787421_n.jpg (59.35 KiB) Viewed 8996 times

so i made a pipe to make it fit from some 52mm exhaust pipe i had lying around and jammed a bit of 1 inch box into the bend to act as a baffel as i knew it would be too loud for me and then just got it welded to the rest of the original back section after the flange

400270_10151226708397719_1195102293_n.jpg (54.79 KiB) Viewed 8996 times

318856_10151226708707719_2031794863_n.jpg (33.64 KiB) Viewed 8996 times

a few months passed and then my diff went boom and blew a hole in the back axle (stuck it in 4wd and carried on home) so i took it out and did a temp repair until i could get a new one and also welded up my axle . . . and i figured it would be rude not to brace it while it was off

31480_10151463083957719_948290248_n.jpg (64.14 KiB) Viewed 8996 times

67068_10151463083807719_798299250_n.jpg (69.53 KiB) Viewed 8996 times

480541_10151463083712719_109946142_n.jpg (86.74 KiB) Viewed 8996 times

20698_10151299547267719_1753949516_n.jpg (72.55 KiB) Viewed 8996 times

[Jay18]

I spot one of my edits got a good build thread there mate

[muddymesser]

There is still more to come but I needed sleep

[muddymesser]

i later got a riveted 16 inch landy rim so i decided to make a hybrid wheel using my suzuki center as i wanted to run a full size spare and it roughly matches the offset of my gv alloys too

295367_10151367441247719_1312545533_n.jpg (50.01 KiB) Viewed 8955 times

735056_10151367440282719_1643944231_n.jpg (69.55 KiB) Viewed 8955 times

paint wise i decided to just keep it simple and spayed it silver . . . but as i was still working with my dad in a sign writing company i made a couple of stickers for it

and then got carried away a tad

419614_10151367444072719_960467631_n.jpg (70.3 KiB) Viewed 8955 times

9.jpg (70.39 KiB) Viewed 8955 times

8.jpg (66.1 KiB) Viewed 8955 times

the tyre i fitted to it was a tad fooked to be honest and its emergency use only so i decided to fit an led strip to the inside of the rim to use as a 3rd brake light(or tail light i forget)

285237_10151411909312719_786380704_n.jpg (64.13 KiB) Viewed 8955 times

526569_10151411909422719_1270621375_n.jpg (27.17 KiB) Viewed 8955 times

the wheel carrier needed a bit of a tweek . . . just cut n drilled the welds and moved it out n up so the 235 85 16 cleared the bumper ok

734133_10151372531877719_1077192278_n.jpg (53.79 KiB) Viewed 8955 times

at some point it got astra shocks up front not entierly sure when and i decided to wrap them in vinyl to brighten them up a bit . . . pretty sure they are the gas ones but not certain any more

429217_10151192326097719_63105358_n.jpg (81.67 KiB) Viewed 8955 times

tread plate sills needed to come off for a spot of welding and they stayed off as they didnt fit right with the new arches so i made up a set out of aluminium composite panel and wrapped in carbon effect vinyl (we must of had about 50 meters of the stuff that we bought dirt cheap)

549861_10151476726697719_829445075_n.jpg (116.37 KiB) Viewed 8955 times

374514_10151476726232719_68466038_n.jpg (64.08 KiB) Viewed 8955 times

my professionally fitted water temp guage

66709_10151715459792719_489471021_n.jpg (39.46 KiB) Viewed 8955 times

shortly after i took her off the road as i was being messed around with money etc so after many arguments i left and moved back to my mums n then in with my girlfriend (now ex) so suzuki has been a bit neglected i hadnt seen her for about 3 months but when i did she fired up first time . . . didnt even need to poke the starter with stick or anything

shes now been sat in my mums front garden while im looking for work but im slowly getting her ready to go back on the road the second i find work

first thing i did was rip out the bulk head behind the seats (luckily i made it easy to remove ) and found my rear seats and seatbelts ready for it to be a 4 seater again

then i decided it needed new door panels after my old ones were painted hard board

made these up

1486824_10152060943912719_2129114535_n.jpg (73.61 KiB) Viewed 8955 times

and now im at the stage where i'm adding rattle mat through out and then going to get some carpets in there too i think

[muddymesser]

my current to do list is

rear diff
rear half shaft studs
check brakes
finish the interior
new head unit
new rear door panel with speakers fitted
and new tyres as im back on the 235 70 16 road tyres as the mud tyres were de laminating and starting to eject tread