power steering
- timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
power steering
Got looking at my power steering pump now the engine is out and it doesn't bolt up to the 1.3 block, it's a 1992 vitara pump, doesn't look brilliantly simple to bodge either, does anyone know if the Jimny one bolts straight up? If so I'll look for one of them!
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
- timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Re: power steering
No ones tried to use vitara power steering on the 1.3?
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
Re: power steering
Hey dude
I think there's something about triming down
A thread mount on the block and re drilling the bracket
Drop Steve green a pm as I think he's done it. Im going to be
Doing It soon ish.
Its the bottom pulley that can be an issue
I bought mine from America
I think there's something about triming down
A thread mount on the block and re drilling the bracket
Drop Steve green a pm as I think he's done it. Im going to be
Doing It soon ish.
Its the bottom pulley that can be an issue
I bought mine from America
Andys Rusty Suzuki Emporium
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: power steering
This is the mod I did to mine when fitting it to the 1.3 engine.
Just a little tab welded on, and re-drill a couple of holes. I seem to remember it wasn't running parallel to the crank front to back, so I had to slightly adjust a mounting pad on the engine block to true it up.
It's a bit of a PITA, but just fiddly to get right.
Just a little tab welded on, and re-drill a couple of holes. I seem to remember it wasn't running parallel to the crank front to back, so I had to slightly adjust a mounting pad on the engine block to true it up.
It's a bit of a PITA, but just fiddly to get right.
- Attachments
-
- Power steering bracket 2.JPG (2.33 MiB) Viewed 5150 times
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: power steering
Oh yeah, you need to fabricate a wedge too to fit a Vitara steering box (but not for a Jimny one). I'm sure I have details, but cant just find it at the moment. I will find it and put it up later if no one else does, as it's a common file on forums.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
- timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Re: power steering
Cheers guys, I have the layout for the wedge that needs making, but i have a different mounting bracket to yours ladaman, I'll have a look later, and throw a picture up I might be missing something important!
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
Re: power steering
Check dan_2k's build for power steering info I would link it but I'm on my phone
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need