speedo ect
Re: speedo ect
vehicle speed sensor
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: speedo ect
Steady on boys !!
Mine runs like a sowing machine !! I spoke to rhino an who told me which wire from the ATM to wore to the clocks.
This vss thingy I don't think has to be plumbed in, as mine has no fault codes and no running issues.
Mike
Mine runs like a sowing machine !! I spoke to rhino an who told me which wire from the ATM to wore to the clocks.
This vss thingy I don't think has to be plumbed in, as mine has no fault codes and no running issues.
Mike
Re: speedo ect
Yours probably doesn't ever go fast enough for the vss to come into play mike
For a road going SJ I would hook it up for optimum engine performance as it is needed for the ecu to adjust settings.
It's not that complicated either http://www.auszookers.com/forum/viewtop ... &hilit=Vss
For a road going SJ I would hook it up for optimum engine performance as it is needed for the ecu to adjust settings.
It's not that complicated either http://www.auszookers.com/forum/viewtop ... &hilit=Vss
- mike harris
- SCUK is my life
- Posts: 1828
- Joined: Sat Jan 08, 2011 8:30 pm
- Location: hascombe Surrey
Re: speedo ect
That's probably only used if the ecu controls fuel pressure. Mine isn't, and anyway seems fine so I ain't touching it !!
I scanned it the other week not a single fault code, it's brilliant
I scanned it the other week not a single fault code, it's brilliant