They are a bit bonkers, 160kg, 69bhp, 150mph. Not bad for 400cc.
Took the fairing and seat covers off to have a better look...not good, wiring all over the place, not sure what any of it does, all twisted together...nice.
The rear disc is beyond shot.
The end can is mullered.
Going to be a long old project but it'll be worth it in the end.
Kawazonkey
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
- Attachments
-
- P101013_17.39_[02].jpg (247.09 KiB) Viewed 6950 times
-
- P101013_17.39_[01].jpg (319.63 KiB) Viewed 6950 times
-
- P101013_17.39.jpg (307.59 KiB) Viewed 6950 times
If it ticks over...leave it
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Kawazonkey
Sure it'll make for a fun machine.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: Kawazonkey
Be well worth it tho they fetch not bad money now for a good one
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Yep, good 'uns go for up to 3k. Think this is a keeper though!
If it ticks over...leave it
-
Darrell
- Suzuki, will you marry me?
- Posts: 2989
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Kawazonkey
2005-GV 1600se, "Hell" What do I know!
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Yep, joined that site the same day I got the bike...some hints but nowhere near as good as SCUK. Asked 1 question, got 2 replies both saying 'don't know'. Whacko.
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
I've been doing bits to the bike whilst waiting for filler to dry in the Beetle...first off I discovered the bike IS restricted. Could have fooled me, but I need a UK CDI for full power. The Jap one restricts it to 10,000rpm and 110mph. UK one lets it rev to 14,750 and max speed. They are rare and pricy but I've kept an eye out and got one for £15!
Wanted to check the coolant and that involves taking the tank and airbox off to access the radiator cap, no worries as they are coming off anyway. Drained the 'coolant' to discover a cup full of brown sludge...nice. Flushed it all out and new coolant in, no cracked block this winter! Not done the oil yet but bet that is tar.
Was going to buy new discs (3 are £500, fuck's sake) but after looking at other bikes mine seem OK so they will stay for now.
Also decided to try polishing the alloy frame and swingarm. This could take some time!
Wanted to check the coolant and that involves taking the tank and airbox off to access the radiator cap, no worries as they are coming off anyway. Drained the 'coolant' to discover a cup full of brown sludge...nice. Flushed it all out and new coolant in, no cracked block this winter! Not done the oil yet but bet that is tar.
Was going to buy new discs (3 are £500, fuck's sake) but after looking at other bikes mine seem OK so they will stay for now.
Also decided to try polishing the alloy frame and swingarm. This could take some time!
- Attachments
-
- P101113_16.18_[01].jpg (294.76 KiB) Viewed 6862 times
-
- P151113_15.35.jpg (208.69 KiB) Viewed 6862 times
-
- P151113_15.36.jpg (368.62 KiB) Viewed 6862 times
-
- P151113_15.37.jpg (295.72 KiB) Viewed 6862 times
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Slow progress I'm afraid. Refurbished one pillion footrest. Woo.
- Attachments
-
- old one on the left...refurb on the right
- P261113_16.54.jpg (158.74 KiB) Viewed 6820 times
-
- P251113_16.22.jpg (223.52 KiB) Viewed 6820 times
-
- P151113_16.24.jpg (248.53 KiB) Viewed 6820 times
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
MPH speedo and a new foot rest hanger turned up today, the old one was poorly welded to say the least. Need a 7mm spanner to get some nuts off and have had to order one, local place had none.
Some bloody odd sizes on this bike...
Some bloody odd sizes on this bike...
- Attachments
-
- P021213_15.50.jpg (192.2 KiB) Viewed 6810 times
-
- not a pretty sight and the return spring forked too
- P021213_15.50_[02].jpg (190.42 KiB) Viewed 6810 times
-
- P021213_15.50_[01].jpg (219.42 KiB) Viewed 6810 times
If it ticks over...leave it
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Kawazonkey
Shiney bits!
7mm, that's the Japanese for you. What was wrong with the Whitworth sizes? Or even good old tried and tested imperial.
7mm, that's the Japanese for you. What was wrong with the Whitworth sizes? Or even good old tried and tested imperial.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank