- Hu weld on the front.jpg (120.33 KiB) Viewed 7820 times
- Hu weld on the front 2.jpg (137.07 KiB) Viewed 7820 times
- TIG detail.jpg (1.19 MiB) Viewed 7820 times
- My guys fitting the original bumper.jpg (127.82 KiB) Viewed 7820 times
My new build
Re: My new build
So now few changes, bigger winch! But now we must redo front to fit it properly. here is the work!
Re: My new build
And finally is done! Mounted under the STD front bumper, tested, winched all days with it, put under the mud and so on.... Now sure i do will hang it from the roof of my factory! Will send you pictures! 
From next week we start to work on new lift kit, 80mm plus brake system. (Final lift will be over 120mm!! This 80 mm is just development for guys that want it later!) At moment driving with 40 something (like 2 inch for imperial guys) and its flawless! Even at MAX speed (Around 150 KM/H) have no issues whatsoever. Taken even to the race track!! Installation is super easy and no other changes needed. Now for 80mm sure will be needed brake lines, relocation brackets to make it perfect, better sway bar (Anti rolling bar) to make it sitll capable on the roads and so on. Will see! Will keep you posted.
Uncle Pascal
- Preping before pain job.jpg (141.69 KiB) Viewed 7811 times
- And its painted.jpg (33.56 KiB) Viewed 7811 times
- And all this fits under the STD front bumper.jpg (33.8 KiB) Viewed 7811 times
- Mounting and wiring winch before the bumper mounting.jpg (106.35 KiB) Viewed 7811 times
Uncle Pascal
-
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: My new build
With the standard grill and bumper off, the Jimny looks a lot less cute and girly compared to normal. The bumper's easy enough to have an alternative one fabricated but a custom grill would be more difficult to make something that looks good.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: My new build
And here it is how looks at moment!
Now next steps, carbon fiber LED-Si roof lights! (Can work over 4 days just on battery!!), Super lightweight, massive lumen delivery, customized and possibel to have in few different sizes!
Then new engine setup, 1.6 bore, titanium coated side skirts, ceramic coated top lightewight foged pistons, Arrow Precision H-Beam connectin rods, Longer duration cams. All this to deliver more TORQUE, not really horse power. Target is on 950RPM to climb wihout having need to put accelerator! Means go over 40 degrees only on idle engine speed.
And last but not least solar panels and second electrcal system self sufficient for cooking, Air-Conditioner, refrigerator, plasma TV, PC and some LED-Si lights. ^_^
Considering tht is ALL done in the house, sure will need a week at least! So please look for updates in some week time. ^_^
Now next steps, carbon fiber LED-Si roof lights! (Can work over 4 days just on battery!!), Super lightweight, massive lumen delivery, customized and possibel to have in few different sizes!
Then new engine setup, 1.6 bore, titanium coated side skirts, ceramic coated top lightewight foged pistons, Arrow Precision H-Beam connectin rods, Longer duration cams. All this to deliver more TORQUE, not really horse power. Target is on 950RPM to climb wihout having need to put accelerator! Means go over 40 degrees only on idle engine speed.
And last but not least solar panels and second electrcal system self sufficient for cooking, Air-Conditioner, refrigerator, plasma TV, PC and some LED-Si lights. ^_^
Considering tht is ALL done in the house, sure will need a week at least! So please look for updates in some week time. ^_^
- My Jimny at moment.jpg (267.38 KiB) Viewed 7776 times
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: My new build
That winch looks brilliant poking through the bumper!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: My new build
This is a great build to watch. 
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
-
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: My new build
Given the lift and spacers, I bet there's some wheels and tyres incoming.turbo-tom wrote:looks good. shame the tyre's let it down.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: My new build
Looking good
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there
Re: My new build
Tires are soon in! Just a bit busy lately with my work. Sorry guys! ^_^