LJ80 A.K.A Suzie rebuild from Malta.

A place for all UK LJ owners to introduce themselves and for all LJ series tech and builds
Post Reply
User avatar
canniria
Got muddy boots
Got muddy boots
Posts: 5
Joined: Thu Jul 11, 2013 12:11 pm
Location: Malta

LJ80 A.K.A Suzie rebuild from Malta.

Post by canniria » Thu Aug 01, 2013 12:09 pm

Hi to you all,
My name is Malcolm and I am from Malta. I bought my first LJ80 last June for 900euros, and am in the process of tearing it asunder. For it has been said that from the ashes of the old, a new LJ shall rise!

...This is it's story. :brows:
I bought the LJ from the neighbouring island of Gozo.
I bought the LJ from the neighbouring island of Gozo.
IMAG0015.jpg (821.18 KiB) Viewed 4961 times
Since the car's plates were garaged, and since I wasn't sure if it was in good working order, I decided to have it towed. 90euros for towing plus 34euros ferry ticket.
Since the car's plates were garaged, and since I wasn't sure if it was in good working order, I decided to have it towed. 90euros for towing plus 34euros ferry ticket.
IMAG0017.jpg (1018.13 KiB) Viewed 4961 times
This is George the tow guy, he's a rough sort and keeps to himself a lot. It took me 4 hours to crack a smile on his face.  Under that surly exterior he is great guy. George enjoys fishing on his spare time.
This is George the tow guy, he's a rough sort and keeps to himself a lot. It took me 4 hours to crack a smile on his face. Under that surly exterior he is great guy. George enjoys fishing on his spare time.
IMAG0016.jpg (796.19 KiB) Viewed 4961 times
Here are some pics of the journey.
Here are some pics of the journey.
IMAG0018.jpg (849.5 KiB) Viewed 4961 times
IMAG0010.jpg
IMAG0010.jpg (1004.75 KiB) Viewed 4961 times
Day 1:  removed steering column + steering wheel, roll cage, doors, soft top and frames, dash board gauges, and started removing electrical harness. 7.5hrs of work.
Day 1: removed steering column + steering wheel, roll cage, doors, soft top and frames, dash board gauges, and started removing electrical harness. 7.5hrs of work.
IMAG0028.jpg (835.33 KiB) Viewed 4961 times
After doing some research online, I noticed that this wasn't the original 797cc engine LJ80s came out with. Instead some one installed a 970cc Suzuki F10a, possibly transplanted from an SJ410 or a Maruti Gypsy of which there are thousands left on the island still in working order.
After doing some research online, I noticed that this wasn't the original 797cc engine LJ80s came out with. Instead some one installed a 970cc Suzuki F10a, possibly transplanted from an SJ410 or a Maruti Gypsy of which there are thousands left on the island still in working order.
IMAG0029.jpg (794.16 KiB) Viewed 4961 times
If you look closely you can see that the air vent just behind the hood has been welded shut by the previous owner, probably due to water and cold air leaking through it.
If you look closely you can see that the air vent just behind the hood has been welded shut by the previous owner, probably due to water and cold air leaking through it.
IMAG0065.jpg (901.74 KiB) Viewed 4961 times
IMAG0030.jpg
IMAG0030.jpg (834.02 KiB) Viewed 4961 times
IMAG0031.jpg
IMAG0031.jpg (819.18 KiB) Viewed 4961 times
Not the original roll cage.
Not the original roll cage.
IMAG0032.jpg (806.03 KiB) Viewed 4961 times
IMAG0033.jpg
IMAG0033.jpg (823.11 KiB) Viewed 4961 times
Found leak in the radiator in the bottom left hand side coner.
Found leak in the radiator in the bottom left hand side coner.
IMAG0060.jpg (889.61 KiB) Viewed 4961 times
So far found : leak in radiator, air vent blocked, huge dead spot in steering wheel, non-original roll cage, missing heater and blower :( , some of the electrics don't work,non-original engine, sparking plugs # 1,3,4 found sooty, #2 found completely foul (oil leak in combustion chamber suspected) will do compression check to determine state of combustion chamber.

Hope you enjoyed this presentation.

More pics to follow

P.S any help/suggestions/tips you would like to give me please feel free to do so, I would really appreciate your input Thanks.
There is no spoon!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: LJ80 A.K.A Suzie rebuild from Malta.

Post by ScottieJ » Thu Aug 01, 2013 12:31 pm

Dose look like a real good start for a restoration. I have spare main hoops of an original roll cage, shipping to malta might be a bit expensive though.
Zuki Build

Steady as she goes!

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: LJ80 A.K.A Suzie rebuild from Malta.

Post by dan_2k_uk » Thu Aug 01, 2013 12:33 pm

If only we could buy them like that for €900
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: LJ80 A.K.A Suzie rebuild from Malta.

Post by turbo-tom » Thu Aug 01, 2013 12:34 pm

nice keep up the work! :D
Tom :)

Ford Fiesta ST :D

Post Reply