Can't work it out? Either too much right foot all the time or poor maintenance
July 6th-7th Wiltshire by-way session
Re: July 6th-7th Wiltshire by-way session
I actually think there is always multiple things wrong with your SJ Twiss!!!
Can't work it out? Either too much right foot all the time or poor maintenance
Can't work it out? Either too much right foot all the time or poor maintenance
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: July 6th-7th Wiltshire by-way session
Its his gammy knees. The throttle only has one position!ScottieJ wrote:I actually think there is always multiple things wrong with your SJ Twiss!!!
Can't work it out? Either too much right foot all the time or poor maintenance
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: July 6th-7th Wiltshire by-way session
I think its a combination of too much right foot all the time and buying unknown condition parts!
I got the gearbox as my other one was really noisy after 6 years of abuse... So I got this one off some guy for £30.
... and I just seem to have an uncanny ability to break diffs ...
i think the volume of the exhaust may have something to do with it
I got the gearbox as my other one was really noisy after 6 years of abuse... So I got this one off some guy for £30.
... and I just seem to have an uncanny ability to break diffs ...
i think the volume of the exhaust may have something to do with it
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: July 6th-7th Wiltshire by-way session
Twiss is Sj aint that bad it just locks up at 7:00am on a saturday morning and tries to through you through the hedge other then that i think shes a tough old bean! 
Tom 
Ford Fiesta ST
Ford Fiesta ST
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: July 6th-7th Wiltshire by-way session
Worst case if the rear diff pops or something Jordi is bringing a welded one I think!
Will make it more capable but will make the drive home rather interesting
Will make it more capable but will make the drive home rather interesting
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
NylonAdmiral
- Winching along now
- Posts: 521
- Joined: Wed Apr 03, 2013 8:39 pm
- Location: Devizes, Wiltshire
- Contact:
Re: July 6th-7th Wiltshire by-way session
I'm impressed at the amount of spare parts everyone's bringing! I think I've used all mine... 
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
-
Jordi
- Bow down before me
- Posts: 7534
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: July 6th-7th Wiltshire by-way session
I have a spare complete drive train, complete ish parts suzuki and a bucket load of other bits.
Also calling at Andys on the way as he has some parts for various people.
Also calling at Andys on the way as he has some parts for various people.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
NylonAdmiral
- Winching along now
- Posts: 521
- Joined: Wed Apr 03, 2013 8:39 pm
- Location: Devizes, Wiltshire
- Contact:
Re: July 6th-7th Wiltshire by-way session
Woohoo! After much wounding with parts suppliers I have managed to get a local garage to get me the right brake pads this afternoon to pick up on my way home form work!
On top of that my new U-bolts arrived too.
One step closer to being ready for the weekend.
It's going to be a long night!
On top of that my new U-bolts arrived too.
One step closer to being ready for the weekend.
It's going to be a long night!
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: July 6th-7th Wiltshire by-way session
Took the country way home.
Wiltshire is looking good
Its waiting for you....
Wiltshire is looking good
Its waiting for you....
- Attachments
-
- 20130704_171843.jpg (3.54 MiB) Viewed 4797 times
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: July 6th-7th Wiltshire by-way session
Have we decided on a definite place and time to meet on saturday morning?
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.