Mikes Samurai build / use / fixing broken bits after abuse

Post by **dan_2k_uk** » Mon Jun 10, 2013 2:11 am

Standard zook interior.

ROBBIE · Post by **ROBBIE** » Mon Jun 10, 2013 8:47 am

Looks good as said bit dirty in there

mike harris · Post by **mike harris** » Tue Jun 11, 2013 8:53 pm

Here we go lads

mike harris · Post by **mike harris** » Tue Jun 11, 2013 9:45 pm

My winch had a bow motor 2 fitted to make it faster and more torquey !! And loads of other little bits too, hopefully get it wired up this week one night.

So much to do and no time to do it !!

Post by **dan_2k_uk** » Tue Jun 11, 2013 10:36 pm

Thats a lotta winch

Post by **Jordi** » Tue Jun 11, 2013 10:45 pm

Might need sommit a bit better than a g clamp to fit it mike.

chrisj410 · Post by **chrisj410** » Wed Jun 12, 2013 3:38 pm

Gwyn lewis tray? Good bit of kit, nice bloke too
You bracing it back to the chassis?
Looks the nuts bud
Enjoy your 8274, they're great

mike harris · Post by **mike harris** » Wed Jun 12, 2013 7:52 pm

Yeh gwyn troff, troff is seem welded to the bumper top bottom and sides and plug welded through 8 holes 40mm diameter, then the bumper is welded to the chassis underneath to the tube and just in front of the steering box. And it's bolted with 10 m10 bolts, throughout the top, and through the standard bumper mounts. I don't think that will move, would stall the winch before that let go.

Yeh 8274 are pretty awesome, I have used them before winching mine out with mates trucks. Sould pull my sj along alrite.

Still more to do before I can play this weekend. Need to get cracking !! This is never ending !!!

chrisj410 · Post by **chrisj410** » Wed Jun 12, 2013 10:08 pm

Fuck... that aint going anywhere haha
Yeah I run the same setup with bow 2 its spot on mate
Still bloody quick haha
Hope its all ready for the weekend bud

mike harris · Post by **mike harris** » Sat Jun 15, 2013 8:58 am

nearly there lol !!

got the axle breather on and the bumper properly painted last night, had a coolant pipe issue to which seemed to have made it past me !!

when I have finished work just need to do the winch and drill one hole and then its ready for playing !!

Suzuki Club UK

Mikes Samurai build / use / fixing broken bits after abuse

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

Re: Mikes Samurai build updated 17/05/13 :)

test