Wobble truck...

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
SJay
Got muddy boots
Got muddy boots
Posts: 6
Joined: Sun Apr 14, 2013 10:27 am

Wobble truck...

Post by SJay » Sun Apr 21, 2013 12:38 am

Not had my sj very long, it's a bit of a project I guess. Anyways when I picked it up the wind was horrendous on the motorway, probably the scariest driving experience I've ever had, really weird wobble that seems to be coming from the rear. Thought it just might be because of the off road tyres, I'm totally new to 4x4, so just put it down to the high winds.
Since then It's been happening when sharply turning, on bumpy roads and worse at 50mph+..
So tonight i checked it over, and one of the u bolts on the passenger side is missing.. Wow. Gonna sort that tomorrow and tighten every other bolt up, but anything else to check? I'm kinda supposed to be collecting and towing back a small boat this weekend.. A 600 mile round trip! Don't fancy it driving it like it is
Thanks

User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Wobble truck...

Post by ferris » Sun Apr 21, 2013 12:55 pm

Missing a u bolt :shock: , that sounds like your problem. I would also check for any play in the wheel bearings.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Wobble truck...

Post by Jordi » Sun Apr 21, 2013 1:01 pm

Bearing, wheel nuts, drum nuts, prop shaft. Make sure all nuts are correctly torqued.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
SJay
Got muddy boots
Got muddy boots
Posts: 6
Joined: Sun Apr 14, 2013 10:27 am

Re: Wobble truck...

Post by SJay » Sun Apr 21, 2013 2:01 pm

Cheers, yeh decided not to go now. Gonna get some new u bolts ordered, yeh one of the nuts is missing from one... :thumbdown: lol

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Wobble truck...

Post by Darrell » Sun Apr 21, 2013 2:23 pm

Dave at http://www.llama4x4.com/page5.htm has a good reputation :thumbup:
Attachments
u bolts.png
u bolts.png (183.62 KiB) Viewed 6046 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Wobble truck...

Post by Edweird » Sun Apr 21, 2013 4:10 pm

Darrell wrote:Dave at http://www.llama4x4.com/page5.htm has a good reputation :thumbup:
I got my U-bolts from there. Friendly bunch. Had them in the post right quick.

One thing I might point out which I rang back about and had explained to me:

If you get a full set of U-bolts, you should find that there are two of them that have a larger radius curve on them. These two bigger ones are for the front axle on the side nearest the diff.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Wobble truck...

Post by andyrew » Sun Apr 21, 2013 11:18 pm

Most of the drum nuts ive worked on are usually knackered
For a couple of quid you can get a new set from muddyzook.com
Andys Rusty Suzuki Emporium

steve greenc3
Engaged 4wd low
Engaged 4wd low
Posts: 115
Joined: Fri Dec 16, 2011 9:51 pm

Re: Wobble truck...

Post by steve greenc3 » Mon Apr 22, 2013 9:52 pm

Check your kingpin bearings, these make an interesting drive when gone past there best!!

Post Reply