Dont quite know what to call it.

The place to socialise, and relax, if it doesn't fit into anything below it fits here, so tell us that joke, or share that story of your last off-road escapade, but remember new comers the virtual drinks are on you!
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Dont quite know what to call it.

Post by turbo-tom » Fri Apr 19, 2013 9:40 am

We all have our times that people get annoyed etc we all had to start somewhere but it does get s bit annoying seeing asking people how much and not following a deal. Anyway enough of that more tool speak. Id do what the others say go out and buy a set a tools dont have to be the best like snap on or mac or anything just get a cheapy set and just get playing with it. About 5 year ago I knew nothing about suzukis but my knowledge is built up from the lads on here and playing around under the bonnet.

And the grief you get of your mates at school or whatever just ignore em fuck em, I was in that posistion I was 12-13 when I got mine getting called every word you can think off. and now they get more annoyed as ive got a snapon roll cab full of snap on tools. But they cant understand that im starting to make a living out my tools and bringing in money rather then going out hanging around on the streets and being a yob all night. Okay that dont make me a Alcoholic nun as I like to go out and have a few beverages here and there. :D

But as said sell/scrap/break the Audi and a suzuki and go buy some tools and getting playing ;)
Tom :)

Ford Fiesta ST :D

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Dont quite know what to call it.

Post by Jordi » Fri Apr 19, 2013 9:53 am

All my tools are Clarke from machine mart. I get the better ones with life time guarantee. Pennys compared to snap on but i think they are great tools for the money.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
OllieSJ
...
...
Posts: 0
Joined: Tue Feb 28, 2012 2:15 pm

Re: Dont quite know what to call it.

Post by OllieSJ » Fri Apr 19, 2013 10:06 am

turbo-tom wrote:We all have our times that people get annoyed etc we all had to start somewhere but it does get s bit annoying seeing asking people how much and not following a deal. Anyway enough of that more tool speak. Id do what the others say go out and buy a set a tools dont have to be the best like snap on or mac or anything just get a cheapy set and just get playing with it. About 5 year ago I knew nothing about suzukis but my knowledge is built up from the lads on here and playing around under the bonnet.

And the grief you get of your mates at school or whatever just ignore em f**k em, I was in that posistion I was 12-13 when I got mine getting called every word you can think off. and now they get more annoyed as ive got a snapon roll cab full of snap on tools. But they cant understand that im starting to make a living out my tools and bringing in money rather then going out hanging around on the streets and being a yob all night. Okay that dont make me a Alcoholic nun as I like to go out and have a few beverages here and there. :D

But as said sell/scrap/break the Audi and a suzuki and go buy some tools and getting playing ;)
I say to most of the people that give me grief ' sorry how many cars do you have' or wait till your shitty saxo breaks down and you will be ring me.
Sj410Q- Spacers, Bucket seats, Su carb , Mot and Tax

User avatar
OllieSJ
...
...
Posts: 0
Joined: Tue Feb 28, 2012 2:15 pm

Re: Dont quite know what to call it.

Post by OllieSJ » Fri Apr 19, 2013 10:07 am

Also i got a set of tools that my mum bought me they are pritty crap as most of it has snapped but the soket set is going nicely if i remember to put it back
Sj410Q- Spacers, Bucket seats, Su carb , Mot and Tax

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Dont quite know what to call it.

Post by Jordi » Fri Apr 19, 2013 10:22 am

Tools aren't mega expensive and you don't need to buy them all at once.

I've collected mine over 15years. Basics to start then extra tools and specialist tools as the job dictates.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
OllieSJ
...
...
Posts: 0
Joined: Tue Feb 28, 2012 2:15 pm

Re: Dont quite know what to call it.

Post by OllieSJ » Fri Apr 19, 2013 10:35 am

Jordi wrote:Tools aren't mega expensive and you don't need to buy them all at once.

I've collected mine over 15years. Basics to start then extra tools and specialist tools as the job dictates.

Taken you nearly my whole life to collect your tools :hahaha:
Sj410Q- Spacers, Bucket seats, Su carb , Mot and Tax

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Dont quite know what to call it.

Post by Jordi » Fri Apr 19, 2013 10:40 am

Been collecting since i was 12/13. Always worked on cars and trucks from being a wee lad. Time in the TA. At home, places i've worked.

Still end up under the wagon or trailer at work now on odd occasions.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Dont quite know what to call it.

Post by andyrew » Fri Apr 19, 2013 11:19 am

Hey ollie.

I didnt mean my comment to come off like I was being a jerk. It was just honest advice.
Negativity on forums isn't a nice thing. Hence why I dont visit difflock.com anymore as they always
Seem to be arguing with each other. :lol:

Everyone's got potential to learn. Im still learning and I love it.
When I first got my sj I was 18 and had my mate change my brake pads.
Then after a few sessions off road. They needed sorting so I gave it a go.
Now 25 and I must have replaced or repaired brakes on at least 40 different cars for ffriends and family.

Once you get going and with practice it gets easier and simpler.

Start a thread on your sj. With some information. And get the ball rolling.

Im a sj fan as many will know. And id love to see the 413 tin top you have sorted.
Andys Rusty Suzuki Emporium

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Dont quite know what to call it.

Post by Jordi » Fri Apr 19, 2013 11:26 am

Likewise Andy, be nice to see another one of yours in one piece. :hahaha:

Mine may not all be on the road but they start and drive :hahaha:
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Dont quite know what to call it.

Post by andyrew » Fri Apr 19, 2013 11:48 am

Jordi wrote:Likewise Andy, be nice to see another one of yours in one piece. :hahaha:

Mine may not all be on the road but they start and drive :hahaha:
I was waiting for that :hahaha: and I knew it would be you !
A prime example as having to many projects. I take them in like
Injury puppys. but they dont heal themselves!

One of mine work. And she does me proud everyday. Fitting the towbar today.
Andys Rusty Suzuki Emporium

Post Reply