New member!
New member!
Hello!!! my name is Fabian, i'm from San Juan, Argentina. Is a place with a lot of montains, and most of them are very hight, about 4000 meters or more!!! (that's a serious problem for truck). I have a "Maruti Gypsy - mg410", the equivalent of a Suzuki sj410 long body, but the differnce is that it's made in India. I have a good friend from england, (Near to saffron walden) and i go to visit him and your beautiful country once a year. We have a lot of problems buying some pieces in my country, so, like a lot of other thinks, i offen buy it there, and late bring it here. One of the things i would like to buy is a RockCrawler 4.16 or 6.5 Gears, a winch and maybe a lockright diff locker for my gypsy, i hope it's compatible, it should be... I'm going to be there the next month. Is there any pleace where i can buy those things? Thank you!!!
This is my Spoa Maruti, 235/75 -15:
This is my Spoa Maruti, 235/75 -15:
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: New member!
Welcome to SCUK.
Rocklobsters tend to be made to order by rockwatt. If you want gears he can order gears in but there is a delivery time of approx 6 weeks. Then you could take gears home and fit yourself.
Also one on ebay http://item.mobileweb.ebay.co.uk/viewit ... 4907854459
Diff lock on ebay http://item.mobileweb.ebay.co.uk/viewit ... 7163223590
Also available from http://www.rsmfg.co.uk/page19.html
Www.jimnybits.co.uk do ARB lockers.
Winches are available all over the place depends on budget, size, brand?
All the items you want can be found on Ebay. I don't see any issues with you being in Argentina. So long as you pay for the items they could be sent to your friends house for when you got here.
Jordi
Rocklobsters tend to be made to order by rockwatt. If you want gears he can order gears in but there is a delivery time of approx 6 weeks. Then you could take gears home and fit yourself.
Also one on ebay http://item.mobileweb.ebay.co.uk/viewit ... 4907854459
Diff lock on ebay http://item.mobileweb.ebay.co.uk/viewit ... 7163223590
Also available from http://www.rsmfg.co.uk/page19.html
Www.jimnybits.co.uk do ARB lockers.
Winches are available all over the place depends on budget, size, brand?
All the items you want can be found on Ebay. I don't see any issues with you being in Argentina. So long as you pay for the items they could be sent to your friends house for when you got here.
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: New member!
Welcome nice looking ZOOK
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: New member!
Hi to club UK nice looking SJ
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: New member!
to the club .
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Re: New member!
to clubUK
Nice maruti
Being in Argentina I would imagine it would be easiest to order your parts from North America?
Both of these companies do nearly all the parts you want however being an SJ410 based maruti you need to check what size the diffs are, I'm not sure but I have a feeling maruti use the larger sj413 and samurai size diffs so samurai lockers should fit, if they use the smaller sj410 size diffs then you might struggle finding lockers for it, lockrite used to make a locker for 410 size diffs but I'm not sure if they still do. If you want ill measure a 410 and a 413 diff so you can work out what you have.
As long as its a transfer box that has a 4wd light switch on (which it should be) then the crawler headsets will fit
http://www.lowrangeoffroad.com/
http://www.trailtough.com/
Nice maruti
Being in Argentina I would imagine it would be easiest to order your parts from North America?
Both of these companies do nearly all the parts you want however being an SJ410 based maruti you need to check what size the diffs are, I'm not sure but I have a feeling maruti use the larger sj413 and samurai size diffs so samurai lockers should fit, if they use the smaller sj410 size diffs then you might struggle finding lockers for it, lockrite used to make a locker for 410 size diffs but I'm not sure if they still do. If you want ill measure a 410 and a 413 diff so you can work out what you have.
As long as its a transfer box that has a 4wd light switch on (which it should be) then the crawler headsets will fit
http://www.lowrangeoffroad.com/
http://www.trailtough.com/
- Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: New member!
Id have thought America would be the best bet as the exchange rate would be better and you would avoid UK taxes like vat, I don't know what the deal is with importing bits to Argentina, i know you can't import from america to Cuba for political reasons.
I like your mg410, the seats in the back look really comfy are they original, what year was it made?
I like your mg410, the seats in the back look really comfy are they original, what year was it made?
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: New member!
Hi and
410 lwb's look cool. Noticed you have fitted a suzuki badge to the side of the bonnet?
410 lwb's look cool. Noticed you have fitted a suzuki badge to the side of the bonnet?
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- The Heretic
- Engaged 4wd low
- Posts: 108
- Joined: Tue Feb 12, 2013 10:39 pm
- Location: Veliko Tarnovo, Bulgaria
- Contact: