i hope someone can help me.
the engine is missing, i've rebuilt the head as there was half the amout of compression as there was the rest in cylinder 4. (this is what the mechanic told me i think he was after the job) anyway i rebuilt it and its still missing as far as i can tell the compression is ok, (testing tomorrow) i dont have any fire in cylinder 2, we tried swapping the leads and its the same. what could cause a misfire? the head was fine, i reseated the valves, new headgasket, and its still missing on cylinder 3. (2nd from the front) Help!! its doing my nut shall i start by changing distributer and leads? ps its a 1.6 8v carb vitara.
Thanks in advance!
Engine Misfire
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Engine Misfire
would go for dizzy cap, rotor arm, leads, and check the plugs to start with.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
-Bradders-
- Got muddy boots
- Posts: 95
- Joined: Thu Dec 13, 2012 1:42 pm
Re: Engine Misfire
I replaced the plugs already so I'll do leads dizzy and rotor first
-
ROBBIE
- I spend far too much time on here
- Posts: 4552
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Engine Misfire
I just said the same as Dan in the other post
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: Engine Misfire
Are any of the plugs washed? on these engines there's water channels that run through the inlet manifold and carb, if the carb gasket or inlet manifold gasket fails it can allow water in causing a missfire.
-
-Bradders-
- Got muddy boots
- Posts: 95
- Joined: Thu Dec 13, 2012 1:42 pm
Re: Engine Misfire
I'm waiting for the rotor etc to turn up then I'll check the inlet Mani gasket as I've got a replacement anyway! Hopefully I can get it running thanks for all the help guys!!
Re: Engine Misfire
Did you get to the bottom of this problem. I'm having the exact same problem on the same cylinder. Thanks
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
-
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: Engine Misfire
Don't take this the wrong way, but did you gap the new plugs when they went in?
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: Engine Misfire
Edweird wrote:Don't take this the wrong way, but did you gap the new plugs when they went in?
Guys take note of the posting dates, hotbob is asking Bradders if he ever solved the problemdonkeychomp wrote:Thought you sold that Vit? Glad you didn't!
Hotbob I think Bradders sold this Vit and he hasn't been online since May so probably won't be around to answer your question. Think he ended up stripping the head down again according to his build thread. http://forum.suzukiclubuk.co.uk/vi ... 1&start=10