Bargain CB (hopefully)

The place to socialise, and relax, if it doesn't fit into anything below it fits here, so tell us that joke, or share that story of your last off-road escapade, but remember new comers the virtual drinks are on you!
Post Reply
User avatar
Ricky-410
Engaged 4wd low
Engaged 4wd low
Posts: 205
Joined: Sun Oct 07, 2012 11:45 pm
Location: West Cumbria

Re: Bargain CB (hopefully)

Post by Ricky-410 » Tue Dec 11, 2012 9:54 pm

i've just put a Midland alan 78 in mine, its seems fine so far but i've only tested it on my dads Beta that was at the end of the garden haha i have a retro looking one but just wanted something that would sit out the way, with a scan feature. Think i paid 30 something 2nd hand off ebay.
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Bargain CB (hopefully)

Post by dan_2k_uk » Tue Dec 11, 2012 9:57 pm

I have a newer slimline Midland one (think its a 38). Does the job nicely and fits in the ashtray slot in the Sammy dash.

Was on a mag mount for a while but got fed up with trees knocking it off.

Now mounted through spare wheel carrier and SWR'd and does well
Last edited by dan_2k_uk on Tue Dec 11, 2012 10:01 pm, edited 1 time in total.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Bargain CB (hopefully)

Post by Jordi » Tue Dec 11, 2012 9:58 pm

dazerede wrote:ye not bad but its in usa what do u think of this one
Click Here for Ebay Listing
This one
image.jpg
image.jpg (1.65 MiB) Viewed 4997 times
Superb basic cb. 80 channel uk/eu. Ideal for close proximity (with in a few miles of each other). Easy to use and reliable.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Bargain CB (hopefully)

Post by Jordi » Tue Dec 11, 2012 9:59 pm

My bad. Thats an iphone issue. Phone must have been upside down. Lol.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Bargain CB (hopefully)

Post by dazerede » Tue Dec 11, 2012 10:02 pm

is that one n ur truck u dont wanna sell it do u :doublethumbs:
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Bargain CB (hopefully)

Post by Jordi » Tue Dec 11, 2012 10:03 pm

Try again
image.jpg
image.jpg (2.39 MiB) Viewed 4986 times
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Bargain CB (hopefully)

Post by Jordi » Tue Dec 11, 2012 10:05 pm

Nah. Not for sale. I bought that one new. Super little CB. Ideal for when there is a few of use together. Quite a few of us have that cb or a very similar model.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
Ricky-410
Engaged 4wd low
Engaged 4wd low
Posts: 205
Joined: Sun Oct 07, 2012 11:45 pm
Location: West Cumbria

Re: Bargain CB (hopefully)

Post by Ricky-410 » Tue Dec 11, 2012 10:56 pm

That's my set up...
Image
One is for the radio and the other for the CB. Probably not recommended but it seems to be fine to me, i haven't got the anus finished yet so i don't know what its like when out and about.
Image
Top
User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: Bargain CB (hopefully)

Post by Tramp » Tue Dec 11, 2012 10:59 pm

I have a retro uniden which is brilliant, (sorry for the photo flash)

Image

Image

I also bought a burner (on the shelf under it) but it just boosted my signal to dangerous levels!

Image

part of my cb criteria was to have a PA Output to connect to my speaker under the bonnet

Image
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Bargain CB (hopefully)

Post by ScottieJ » Tue Dec 11, 2012 11:15 pm

Mines a little midland something or other :lol: bought it off a taxi firm that was shutting down.
Zuki Build

Steady as she goes!
Top
Post Reply

Return to “The Bar”