snorkel Help
snorkel Help
HI guys, im going to knock a snorkel up on the cheap out off sum 68mm plastic drainpipe and a air filter. the question is i need some sort of pipe around 70mm dia, to go from the bottom of the solid plastic tube to the airbox. Dose anyone have any suggestions on what i could use i have looked on net and ebay and running out of idears. Thanks andy
Re: snorkel Help
try hardware stores for some flexi hose B&Q HOMEBASE WICKES etc doesn't matter what it is so long as its watertight and fits
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
- Darrell
- Suzuki, will you marry me?
- Posts: 2989
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: snorkel Help
Found this http://www.demon-tweeks.co.uk/motorspor ... -ducting-2 if you can't find anything local.
2005-GV 1600se, "Hell" What do I know!
Re: snorkel Help
ill try bq some were like that do you guys round it up O/S or N/S
Re: snorkel Help
depending where you airbox/carb is i'd run it from there.
eg. my carb is drivers side so i'd run one straight out through edge of bonnet/wing and up where the aerial is
eg. my carb is drivers side so i'd run one straight out through edge of bonnet/wing and up where the aerial is
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: snorkel Help
Steal the pipe off of the mrs Hoover, I made one on my samurai got my pipe from machine mart
Re: snorkel Help
was it 70mmchrisj410 wrote:Steal the pipe off of the mrs Hoover, I made one on my samurai got my pipe from machine mart