cherry bomb

[dazerede]

i would like to get a cherry bomb exhaust but cant find and inlet small enough to fit on my 410 sj my inlet it roughly 30mm yes i now pee shooter and the smallest inlet i can find on a cherry bomb is 38mm would it be alright to modify it a bit

Click Here for Ebay Listing

[dan_2k_uk]

I just scaled mine down with a few other bits i had untill it was the right size by the time it got to the flange in the middle of the system.

Dan

[turbo-tom]

i would like to get a cherry bomb exhaust but cant find and inlet small enough to fit on my 410 sj my inlet it roughly 30mm yes i now pee shooter and the smallest inlet i can find on a cherry bomb is 38mm would it be alright to modify it a bit

Click Here for Ebay Listing

could pug it by mig welding it but thats bit of a bodge at 8mm ,

or another option what i would to is cut loads of equal lines down the tube and bend then inwards onto the 30mm pipe then weld it up

another option use one of theses because you would be able to crush the 2mm differents with a exhaust clamp n paste

Click Here for Ebay Listing

[dazerede]

chears might go and do some shopping naw

[charger]

I have a Cherry bomb silencer, from the manifold I have a Peugeot 206 exhaust system that goes into the Cherry bomb. Sounds great & everything fits well.

[twiss]

You could weld a ring around the exhaust pipe, then weld the cherry bomb onto the weld line.
That will give you a bit less distance to bridge!