Vitara 1.6 into Samurai 413

Got an electrical gremlin? Ask the question here.
User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Vitara 1.6 into Samurai 413

Post by Edweird » Wed May 04, 2011 9:13 am

Smalljeep wrote:definatley a very good feeling but now its not so good, the engines very knocky, low oil pressure, the sump is leaking.
But it runs! :D
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

Smalljeep
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon May 02, 2011 11:44 am

Re: Vitara 1.6 into Samurai 413

Post by Smalljeep » Wed May 04, 2011 10:23 am

its definatley better for it to run bad as not run at all, but now i need to sort out this oil pressure problem, the light comes on, i took out the switch but no oil is reaching it when i crank it over, not good.
1991 Suzuki Samurai with 1.6 8v engine
2002 Peugeot 406 HDi 110 Executive

User avatar
ScottieJ
The Boss
The Boss
Posts: 11623
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Vitara 1.6 into Samurai 413

Post by ScottieJ » Wed May 04, 2011 11:29 am

Do not run it if you aren't getting oil pressure, shut it off instantly if the light stays on, a leaking sump shouldn't matter as long as there is enough oil in the engine, I would fit a new oil pump before you even think about firing it up again otherwise you might cause some terminal damage to the engine :thumbdown:
Zuki Build

Steady as she goes!

Smalljeep
Engaged 4wd low
Engaged 4wd low
Posts: 159
Joined: Mon May 02, 2011 11:44 am

Re: Vitara 1.6 into Samurai 413

Post by Smalljeep » Wed May 04, 2011 1:27 pm

the engine really doesnt sound healthy at the moment (its also running on 2 stroke because thats what the auto electrician had)
i have drained the sump, will take it off later, the rocker cover is off, and the head seems to have a bit of oil round the vital bits but not enough. There is no oil getting to the pressure switch.
The problem is the pickup tube gauze when fitted to the modified sump was too close and i think its not picking up.
The oil was not an issue with this engine before it came out of the vitara, but i suppose i could check the oil pump, where is it mounted?
1991 Suzuki Samurai with 1.6 8v engine
2002 Peugeot 406 HDi 110 Executive

Post Reply