Engine not running right? see if we can help you!
-
timmo
- Got muddy boots
- Posts: 29
- Joined: Sun Jan 16, 2011 9:59 am
Post
by timmo » Thu Mar 31, 2011 6:27 pm
Hello all,
I have a problem. Taken out the 970 lump and am putting in 413 unit with 5 speed box but it wont fit! I have 413 engine mounts but the left mount will not line up by about 3 inches and both mounts just seem too short. also the gearbox mount is different and will not fit either
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
-
Contact:
Post
by twiss » Thu Mar 31, 2011 7:43 pm
Hi yeah you will need to make and weld different engine mounts for 413 engine...
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
timmo
- Got muddy boots
- Posts: 29
- Joined: Sun Jan 16, 2011 9:59 am
Post
by timmo » Thu Mar 31, 2011 8:03 pm
Sh##t didnt need that! Anyone want a 413 engine with weber carb paddle clutch and all anciliaries? especially if you have good970 in return?
-
ScottieJ
- The Boss
- Posts: 11623
- Joined: Tue Apr 15, 2008 12:13 pm
- Location: Chippenham, wiltshire
Post
by ScottieJ » Thu Mar 31, 2011 8:32 pm
Hey timmo where in the country are you, there might be someone nearby that can help, its pretty darn easy to modify the engine mount on the chassis.
-
Henry
- Suzuki Guru
- Posts: 1219
- Joined: Wed Apr 01, 2009 6:08 pm
Post
by Henry » Thu Mar 31, 2011 8:35 pm
Its a 10 min job with the grinder and welder. Cut mount off, bolt to engine drop back on chassis rail weld up
Like Scot said where are you people are always willing to help on hear
-
timmo
- Got muddy boots
- Posts: 29
- Joined: Sun Jan 16, 2011 9:59 am
Post
by timmo » Thu Mar 31, 2011 9:39 pm
Thanks for the encouragement! I live near Bury st eds in suffolk. I'm afraid I have no welder. I assume gearbox mount needs welding too?
