SJ416 Samurai Build

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Mon Sep 06, 2021 8:28 pm

Hey everyone overdue a update. Decided to change some things up again and try get the SJ in a better state.

Main thing I wanted to do was move the fuel tank from behind the seats to back under the rear of the car. Had to modify some of the original mounts and make up some bars to take the vitara tank but managed to get it into place and get the rear sealed back up. Also decided to put a half bulkhead in behind the seat to try stop the water running in from the back.
20210622_134610.jpg
IMG_20210622_163146_855.jpg
20210704_195546.jpg
20210704_195616.jpg
Also got round to swapping the Tailgate over and cut the tailights into the bumper for abit more protection.
20210723_141044.jpg
20210720_122127.jpg
IMG_20210702_172047_613.jpg
20210704_114508.jpg
Thought it was time to put some decent new springs on aswell as I've been running second hand ome for a while. Got all my bushes and springs fitted. Drilled the rear perches a inch back. But sadly I'm still waiting on my shocks arriving. The dealer ran out and there on back order from Australia but I've been told they should be here next month. Anyway one last picture of how she's currently sitting and hopefully more to update soon

20210905_174209.jpg
Thanks for your time
Martin
SJ413 LWB Santana 33s, 94",

User avatar
Philpy
Got muddy boots
Got muddy boots
Posts: 32
Joined: Tue Nov 30, 2010 9:27 am
Location: Cornwall

Re: SJ416 Samurai Build

Post by Philpy » Mon Sep 06, 2021 9:12 pm

Lookingt good mate. Some work gone into that!

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: SJ416 Samurai Build

Post by donkeychomp » Mon Sep 06, 2021 9:14 pm

Looking mean and moody. I love it.
If it ticks over...leave it

Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Mon Sep 06, 2021 9:38 pm

Thanks guys its slowly getting there. Might end up as a Christmas present go myself at this rate
SJ413 LWB Santana 33s, 94",

Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Sun Sep 12, 2021 8:59 pm

Ticked a few jobs of the list today! Made some new Headlight mounts. The previous where made in a rush and one ended up snapping. So now there made of 2mm steel and have had a nice coat of zinc primer before being painted black like the light boxes. Also decided to remove the transfer box handbrake as I'm going to try something different instead. Then finally I mounted a carbon canister from a jimny as all the vitara ones I could find where to far rotten. Still need to get some hoses to pipe it up but atleast then the fuelling system will be plumbed up as intended.

IMG_20210912_203108_060.jpg
IMG_20210912_203108_029.jpg
20210912_163619.jpg
20210912_163043.jpg
20210912_170538.jpg
20210912_163615.jpg
20210912_194744.jpg
IMG_20210912_203107_974.jpg
Will hopefully manage back up during the week to possibly make a start to preparing the body for paint, nothing special just another roller job. Will probably need to wait till payday to order the paint but least it'll be ready for when it gets here. Probably still beat the shockys 😂

Cheers Martin
SJ413 LWB Santana 33s, 94",

User avatar
d_r_1989
Winching along now
Winching along now
Posts: 523
Joined: Tue Jul 08, 2014 1:49 pm
Location: Halifax west Yorkshire

Re: SJ416 Samurai Build

Post by d_r_1989 » Mon Sep 13, 2021 9:05 pm

Good work Martin. Disc handbrake is much better than the transfer in my opinion if that's the route your going down. Looking good

Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Tue Sep 14, 2021 12:33 pm

d_r_1989 wrote:
Mon Sep 13, 2021 9:05 pm
Good work Martin. Disc handbrake is much better than the transfer in my opinion if that's the route your going down. Looking good
Cheers its taking its time 😂 I will be going down the disk route but thinking of using a hydro set up.
SJ413 LWB Santana 33s, 94",

Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Mon Oct 11, 2021 2:50 am

Hello again been lacking on the updates. Got through a bunch of jobs. It's been painted again. Still got to do the roof and finish some the sill around the hole for the side exit. With the vitara tank in the back I've not much space for the exhaust. So it's having to come out the sill.
20211010_145605.jpg
20211010_151239.jpg
Also added a hydro to the factory handbrake for a little bit extra. Drum on the tbox isn't in the best of shape and I had one lying around.
20211002_214004.jpg
20211010_150746.jpg
20211002_132646.jpg
Hoping to get the exhaust made this week one night. Having to put a bigger box in as it's abit loud with the one narrow resonator.
SJ413 LWB Santana 33s, 94",

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: SJ416 Samurai Build

Post by Anton » Mon Oct 11, 2021 9:53 pm

That's looking totally boss!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Rankine
Can I have a tow
Can I have a tow
Posts: 275
Joined: Sun Nov 23, 2014 1:38 pm
Location: Stirling, Scotland

Re: SJ416 Samurai Build

Post by Rankine » Tue Oct 12, 2021 8:38 am

Cheers Anton I can't wait to get it back out and try stay on top off repairs this time round
SJ413 LWB Santana 33s, 94",

Post Reply