Dan's Suzuki Samurai build
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Dan's Suzuki Samurai build
Finally updated my CB antenna location.
Was nice and protected mounted between the spare and the tailgate on the spare wheel carrier but performance was poor due to the wheel interfering so I made up a little bracket to move it away from the wheel.
Bit of a pain as I had to deal all the rivets out of the rear door card to attach a support bracket inside the tailgate and get the cable through and the cable was a real fight to get down the flexy conduit between the body and the tailgate.
Took advantage of having the card off to fix the tailgate lock mechanism and add a hole so I can open it if it manages to lock itself again.
Yes I know she really deserves a good wash.
Was nice and protected mounted between the spare and the tailgate on the spare wheel carrier but performance was poor due to the wheel interfering so I made up a little bracket to move it away from the wheel.
Bit of a pain as I had to deal all the rivets out of the rear door card to attach a support bracket inside the tailgate and get the cable through and the cable was a real fight to get down the flexy conduit between the body and the tailgate.
Took advantage of having the card off to fix the tailgate lock mechanism and add a hole so I can open it if it manages to lock itself again.
Yes I know she really deserves a good wash.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Dan's Suzuki Samurai build
You need to give it a good clean lol poor thing
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Re: Dan's Suzuki Samurai build
Looks smart, i've mounted mine in a similar location, but using a side mount.
Only downside for me, is that it keeps hitting the roof support hoop if it catches, oh and multistory carparks XD
I hope you're going to clean it soon?
Only downside for me, is that it keeps hitting the roof support hoop if it catches, oh and multistory carparks XD
I hope you're going to clean it soon?
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT
Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk
Re: Dan's Suzuki Samurai build
Yeah, I polished mine haha!
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT
Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk
- dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Dan's Suzuki Samurai build
Haha it's starting to go green in places lol
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Dan's Suzuki Samurai build
Dunno what they are on about Dan, looks authentic.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Dan's Suzuki Samurai build
The thing is if you clean it it just gets dirty again......
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- SlimGrim
- Winching along now
- Posts: 510
- Joined: Tue Oct 13, 2015 3:39 pm
- Location: Norwich Norfolk
- Contact:
Re: Dan's Suzuki Samurai build
I always think layers of different coloured mud tells a good story, like hitting a very rich in iron glane after a very sandy/ yellowy (it's now a word) lane the night before creates a cool two tone effect
___________________
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)
1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Dan's Suzuki Samurai build
Bit of an update here for those that don't follow me on social media.
Had a bit of an "incident" in August.....
Drove it home after removing most of the bent stuff.
After a lot of jacking/hammering/bending/hammering it's now back in shape and watertight.
Going to keep the doors and roll hoop that colour and repair the screen surround and paint it black to match unless I come across a really good black surround before I get round to it. The roll hoop to screen links have since been dressed up and painted black.
Still got some other dents to fettle a little and some missing paint to tough up but she's solid, watertight, and driveable again.
Also replaced exhaust mainfold with a janspeed. Freed up some power but now quite loud as the rest of the system is rather minimal....
Had a bit of an "incident" in August.....
Drove it home after removing most of the bent stuff.
After a lot of jacking/hammering/bending/hammering it's now back in shape and watertight.
Going to keep the doors and roll hoop that colour and repair the screen surround and paint it black to match unless I come across a really good black surround before I get round to it. The roll hoop to screen links have since been dressed up and painted black.
Still got some other dents to fettle a little and some missing paint to tough up but she's solid, watertight, and driveable again.
Also replaced exhaust mainfold with a janspeed. Freed up some power but now quite loud as the rest of the system is rather minimal....
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.