Tyres Pressure

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
charger
Engaged 4wd low
Engaged 4wd low
Posts: 201
Joined: Tue Jun 28, 2011 8:26 am
Location: Newcatle Under Lyme Staffordshire

Tyres Pressure

Post by charger » Fri Jun 08, 2012 3:04 pm

What is the ideal pressure for mud tyres on the road & what can I lower them to for off road. The tyres does not state any figures, they are broncos if that makes any difference.
1991 Samurai
Rough Country Lift/Shocks
Cherry Bomb Exhaust
Bronco Diamond Back 215/15
Llama Brake Hose

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Tyres Pressure

Post by ScottieJ » Fri Jun 08, 2012 3:28 pm

Service Manual states 20psi front and rear but 26psi in the rear if carrying weight.

That's what I run mine at. I'm too lazy to change it when off road.
Zuki Build

Steady as she goes!

User avatar
Highlander
Can I have a tow
Can I have a tow
Posts: 350
Joined: Thu Sep 08, 2011 12:19 pm
Location: Kilmarnock

Re: Tyres Pressure

Post by Highlander » Fri Jun 08, 2012 4:50 pm

I usually run mine at 20 psi off road depending on the terrain

If its REALLY boggy and wet I've had them down as low as 10 psi
Image

User avatar
SierraDan
Got muddy boots
Got muddy boots
Posts: 38
Joined: Sun Jan 11, 2015 5:45 am
Location: NSW, Australia

Re: Tyres Pressure

Post by SierraDan » Wed Jan 14, 2015 12:07 am

I run 20-22psi on road and 5psi Offroad.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Tyres Pressure

Post by dan_2k_uk » Wed Jan 14, 2015 6:50 pm

18psi. Can't be bothered to change them off road either...
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
1066 Boy
Engaged 4wd low
Engaged 4wd low
Posts: 103
Joined: Mon Oct 13, 2014 8:01 pm
Location: Hastings, East Sussex

Re: Tyres Pressure

Post by 1066 Boy » Thu Jan 15, 2015 10:57 am

Mine are at 20 psi front because of heavy winch bumper and winch with
steel cable at the moment.

Rear are at 15 psi at the moment but as the kja is so light at the back and
the tyres are fat, this is still a bit much at the moment. wheel spin on roundabouts
etc.

Offroad around 10 psi works for me. :salute:
I Know how to work it. Not, how it works...............
believe me, there is a difference!!!

Frenchy
Engaged 4wd low
Engaged 4wd low
Posts: 104
Joined: Sat Dec 12, 2015 9:28 pm

Re: Tyres Pressure

Post by Frenchy » Sun Apr 24, 2016 12:39 pm

I've been reading around the internet and 20 psi to 33 psi (2.2 bar) seem to be the pressures recommended.For normal road use does anyone have the definitive figure?

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Tyres Pressure

Post by dan_2k_uk » Sun Apr 24, 2016 2:12 pm

There isn't one because everyone is running different types and sizes of tryes to standard.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Tyres Pressure

Post by twiss » Sun Apr 24, 2016 2:19 pm

Mostly road use I go for 22psi... 30+ psi is WAY too hard
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Tyres Pressure

Post by ScottieJ » Sun Apr 24, 2016 11:28 pm

Frenchy wrote:I've been reading around the internet and 20 psi to 33 psi (2.2 bar) seem to be the pressures recommended.For normal road use does anyone have the definitive figure?
30+ is way too hard, standard Sj tyres should be at 20psi and up to 26 in the rear of carrying weight, larger tyres generally have stronger sidewalks so the pressures can be reduced.
Zuki Build

Steady as she goes!

Post Reply