Got a bit of a weepy hub, well 2, is this a fail?
I pulled a hub off today to replace the seal(?) in the axle as I had one in a box, But its too big. So anyone know where I can get one? They dont have them on big jimny
MOT time
-
ROBBIE
- I spend far too much time on here
- Posts: 4561
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
MOT time
Been a while since I did an MOT and cant remember if I have a problem, sure it is
Got a bit of a weepy hub, well 2, is this a fail?
I pulled a hub off today to replace the seal(?) in the axle as I had one in a box, But its too big. So anyone know where I can get one? They dont have them on big jimny
Got a bit of a weepy hub, well 2, is this a fail?
I pulled a hub off today to replace the seal(?) in the axle as I had one in a box, But its too big. So anyone know where I can get one? They dont have them on big jimny
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
twiss
- SCUK Computer Wizard
- Posts: 6111
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Brighton, UK
- Contact:
Re: MOT time
Should be advisory at the most... the probably wouldn't even notice it over here
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: MOT time
Try jimnybits
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
-
ROBBIE
- I spend far too much time on here
- Posts: 4561
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: MOT time
Did mate, not got themtrotter wrote:Try jimnybits
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
ROBBIE
- I spend far too much time on here
- Posts: 4561
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: MOT time
Is this the part I need?
Click Here for Ebay Listing
Sorry if Im being a bit dumb here, having problems with memory
Click Here for Ebay Listing
Sorry if Im being a bit dumb here, having problems with memory
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: MOT time
I don't know the sizing but JB do have them http://www.jimnybits.co.uk/shop/jimny/s ... _1470.html
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: MOT time
Bigjimny do have them too http://www.bigjimny.com/store/front-axle-oil-seal.html
Same size as an SJ 26 x 38 x 8 R23
Same size as an SJ 26 x 38 x 8 R23
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
ROBBIE
- I spend far too much time on here
- Posts: 4561
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: MOT time
Arse wish I had seen them 
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
ROBBIE
- I spend far too much time on here
- Posts: 4561
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: MOT time
So it failed, apparently one of the rear springs has snapped
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: MOT time
Ooops! Got a spare one?ROBBIE wrote:So it failed, apparently one of the rear springs has snapped
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map