New member South Wales
-
- Got muddy boots
- Posts: 7
- Joined: Thu Feb 04, 2016 8:46 am
New member South Wales
Hi all,
Might not be to everyone's taste , but I have a 1971 Vauxhall Firenza which I've converted to Suzuki power , I've owned SJ413, Bale no, Alto , and recently an Ignis , very impressive that for a 1300.
Currently running a Baleno 1600 16 valve single cam coil on cam engine , Baleno MPFI, mated to an SJ413 5 speed box via adapter plate. Vitara 1600 rad and exhaust manifold .purpose made prop driving rear wheels only to a Vauxhall Viva 1800 rear axle (best option for gearing ).
Baleno pedal box and master cylinder , plus steering column / controls.
Old Alto leather stearing wheel, and all electric cables and ecu , fuse boxes etc from a Bale no plus the instrument panel now built into the Firenza dash.
Bit of a mix / match of parts but most of the running gear is now Suzuki
Prior to the Bale no setup , I tried out a basic carb 413 engine , then tried a carbed Vitara 1600 engine (both 8 valve) , but settled on the Baleno for better power and reliability with its 16 valves and decent fuel injection & coil on cam system.
Ok it's not for the purists , but Vauxhall and Suzuki did collaborate in the late 80's with the Carry / Rascal ranges
Might not be to everyone's taste , but I have a 1971 Vauxhall Firenza which I've converted to Suzuki power , I've owned SJ413, Bale no, Alto , and recently an Ignis , very impressive that for a 1300.
Currently running a Baleno 1600 16 valve single cam coil on cam engine , Baleno MPFI, mated to an SJ413 5 speed box via adapter plate. Vitara 1600 rad and exhaust manifold .purpose made prop driving rear wheels only to a Vauxhall Viva 1800 rear axle (best option for gearing ).
Baleno pedal box and master cylinder , plus steering column / controls.
Old Alto leather stearing wheel, and all electric cables and ecu , fuse boxes etc from a Bale no plus the instrument panel now built into the Firenza dash.
Bit of a mix / match of parts but most of the running gear is now Suzuki
Prior to the Bale no setup , I tried out a basic carb 413 engine , then tried a carbed Vitara 1600 engine (both 8 valve) , but settled on the Baleno for better power and reliability with its 16 valves and decent fuel injection & coil on cam system.
Ok it's not for the purists , but Vauxhall and Suzuki did collaborate in the late 80's with the Carry / Rascal ranges
- Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: New member South Wales
Yeah sounds great, looking forward to the pictures!
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: New member South Wales
Sounds interesting. Welcome
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: New member South Wales
+1 for pix!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
- Got muddy boots
- Posts: 7
- Joined: Thu Feb 04, 2016 8:46 am
Re: New member South Wales
Nearly ready for paint - but ive been saying that for about 4 years - always find something else to mod / change , so its just an on going project
Was looking at maybe upgrading to the 1800 Baleno twin cam , but not sure if that is an easy swap , heard its a problem to link up to an sj413 box .
Was looking at maybe upgrading to the 1800 Baleno twin cam , but not sure if that is an easy swap , heard its a problem to link up to an sj413 box .
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: New member South Wales
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
- RickUK
- Can I have a tow
- Posts: 459
- Joined: Sat Jan 09, 2010 7:31 pm
- Location: Not sure me Tom Tom is bust,but it could be North of Watford Gap.Could be Bedfordshire though.
- Contact:
Re: New member South Wales
A very unusual combination but certainly does have alot of potential,can remember meeting Gerry Marshall back in the early 70s when he used to race Vauxhall Firenzas for Team Vauxhall,very successful he was with it as well.
Deceased.
SJ413 tinwormed to the great car grave yard in the sky.
Vitara LWB V6 engine deceased and also in the great grave yard in the sky.
www.hideones.info www.hideones.info
Current wheels.
BMW X5 Le Mans 3.0turbo diesel.
Looking for a newish Suzuki Jimny.
SJ413 tinwormed to the great car grave yard in the sky.
Vitara LWB V6 engine deceased and also in the great grave yard in the sky.
www.hideones.info www.hideones.info
Current wheels.
BMW X5 Le Mans 3.0turbo diesel.
Looking for a newish Suzuki Jimny.
-
- Got muddy boots
- Posts: 7
- Joined: Thu Feb 04, 2016 8:46 am
Re: New member South Wales
I know it's not a 4x4, but the engine choice was a direct result of reading about the Baleno engine on the Autozookers forums , where a few people had done the conversion into their Samurais.
Also needed the coil on cam version , as previous 413 + Vitara engines I tried , the dizzy position wasn't great as much too close to bulkhead.
As mentioned I wouldn't mind trying out the 1800 twin cam (Baleno again) , has anyone done that conversion to an sj413 box ?
Also needed the coil on cam version , as previous 413 + Vitara engines I tried , the dizzy position wasn't great as much too close to bulkhead.
As mentioned I wouldn't mind trying out the 1800 twin cam (Baleno again) , has anyone done that conversion to an sj413 box ?