wrong Rear wheel bearings

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
Banwellboy
Got muddy boots
Got muddy boots
Posts: 3
Joined: Sat Dec 19, 2015 6:33 pm

wrong Rear wheel bearings

Post by Banwellboy » Sat Jan 09, 2016 4:20 pm

I have stripped out the rear axle shafts on my SJ413 "1989" to replace the bearings, quite easy really so pleased. ordered and got the new bearings and they dont fit ?
KWB 450 WHEEL BEARING KIT , comes up everywhere as fitting mine.
I have a rocklobster box do you think they may have changed axle as well ? the wheel bearing is miles too small.
any one else had this problem ?
Attachments
$_57 (3) (2).JPG
$_57 (3) (2).JPG (214.34 KiB) Viewed 3385 times

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: wrong Rear wheel bearings

Post by andyrew » Sat Jan 09, 2016 5:00 pm

I'm certain that all the sj range uses the same bearing.

It sounds to me like its just an incorrect part. But maybe worth puting
Up a photo of the rear axle just in case someone's fitted a modified
Vitara axle on the rear.

Where did the bearing come from?
Andys Rusty Suzuki Emporium

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: wrong Rear wheel bearings

Post by twiss » Sat Jan 09, 2016 5:01 pm

Looking on ebay it seems thats a kit for a jimny and not a 413/samurai...
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

Post Reply