Yes Aaron I did. It's all in the prep work and technique. You can get amazing results with a spray can on smaller parts. For larger things (like an entire car) I use a compressor and a proper sprayer.
Sometimes lol.
Kawazonkey
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Had a problem fitting the new DID chain. I checked the number of links with the old one and they are the same but the thing just would not go on. So I tried putting the chain on the wheel then sliding the spindle through and it's on but way way too tight, no play in it at all so I am going to add an extra link from the old chain until it stretches a little, then remove it. The seat unit is now lacquered...
- Attachments
-
- WP_20150913_001.jpg (392.27 KiB) Viewed 6927 times
-
- WP_20150913_002.jpg (341.3 KiB) Viewed 6927 times
-
- WP_20150913_005.jpg (371.22 KiB) Viewed 6927 times
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Seat unit has the lights in and is back on the bike. Started painting the lower fairings now, looking good so far.
The front wheel has had new bearings and the new Pirelli is on. All to no avail as the bike shop spotted a dent on the rim. Luckily I have a dent free spare but all the allen bolts holding the disc on are rounded off. So I left it with them to sort it!
The front wheel has had new bearings and the new Pirelli is on. All to no avail as the bike shop spotted a dent on the rim. Luckily I have a dent free spare but all the allen bolts holding the disc on are rounded off. So I left it with them to sort it!
- Attachments
-
- WP_20150915_001.jpg (468.61 KiB) Viewed 6914 times
-
- WP_20150915_002.jpg (324.12 KiB) Viewed 6914 times
-
- WP_20150915_003.jpg (566.12 KiB) Viewed 6914 times
-
- WP_20150915_004.jpg (473.66 KiB) Viewed 6914 times
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Back on her own boots now...the exhaust is back on. The front wheel is the one with the dent in it but the bike shop have got the knackered bolts off the spare wheel so I will get that painted, then swap the bearings and tyre over and she's not got far to go. Finish painting the panels..and the tank, that's about it.
- Attachments
-
- WP_20150918_001.jpg (589.41 KiB) Viewed 6871 times
-
- WP_20150918_002.jpg (552.46 KiB) Viewed 6871 times
If it ticks over...leave it
-
Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Kawazonkey
Looking good, not far to go now,
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
Cheers Tramp...more done, the nose fairing has been lacquered and the new screen is on too. Lower panels are all finished...just the middle ones to go...and the dent free front wheel is all ready too.
- Attachments
-
- WP_20150920_001.jpg (658.75 KiB) Viewed 6848 times
-
- WP_20150920_002.jpg (554.13 KiB) Viewed 6848 times
-
- WP_20150920_003.jpg (502.26 KiB) Viewed 6848 times
-
- WP_20150920_004.jpg (615.78 KiB) Viewed 6848 times
-
- WP_20150920_005.jpg (481.09 KiB) Viewed 6848 times
-
- WP_20150920_007.jpg (518.98 KiB) Viewed 6848 times
-
- WP_20150920_008.jpg (508.65 KiB) Viewed 6848 times
-
- WP_20150920_009.jpg (607.47 KiB) Viewed 6848 times
-
- WP_20150920_010.jpg (550.92 KiB) Viewed 6848 times
If it ticks over...leave it
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
I've finally got the tank stripped and ready for paint...the underneath is black as that is how it comes from the factory. The mudguard is done and is on. Middle section of the fairing will be done next. That part that is painted white is there for a reason!
- Attachments
-
- WP_20150926_001.jpg (675.56 KiB) Viewed 6812 times
-
- WP_20150926_005.jpg (464.81 KiB) Viewed 6812 times
-
- WP_20150926_006.jpg (521.41 KiB) Viewed 6812 times
-
- WP_20150926_010.jpg (413.18 KiB) Viewed 6812 times
-
- WP_20150926_002.jpg (353.64 KiB) Viewed 6812 times
-
- WP_20150926_007.jpg (519.21 KiB) Viewed 6812 times
-
- WP_20150926_008.jpg (534.73 KiB) Viewed 6812 times
-
- WP_20150926_003.jpg (527.95 KiB) Viewed 6812 times
If it ticks over...leave it
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Kawazonkey
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kawazonkey
wow a big thumbs up! Glad to see you back on the forum matey.
If it ticks over...leave it
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Kawazonkey
Sort of, I'm a bit of a trainwreck at the moment. Only just able to tell which way is up...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map