Project Bodge

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Fri Apr 25, 2014 9:07 am

I have got a cone cutter somewhere. I'll have to dig it out.

Yeah i'm quite wary of the axle bending. When i welded the perches i only did 10mm welds at a time and let it cool down inbetween.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Tue Apr 07, 2015 5:59 pm

Time for a small update. Can't belive i started work on these axles a year ago :shock: and there still not finished :lol: .

This is how there looking at the moment. Perches have been moved and all the trussing has been finished. Just waiting on a couple of diff gaurds to turn up, so i can finish the welding and get them all painted.

Hopping to get them on by the end of the month.

Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Project Bodge

Post by Jordi » Tue Apr 07, 2015 8:01 pm

ferris wrote:Time for a small update. Can't belive i started work on these axles a year ago :shock: and there still not finished :lol: .

This is how there looking at the moment. Perches have been moved and all the trussing has been finished. Just waiting on a couple of diff gaurds to turn up, so i can finish the welding and get them all painted.

Hopping to get them on by the end of the month.

Image
Nice work Ferris. Sould make it flex a lot better.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Project Bodge

Post by kiwizook » Tue Apr 07, 2015 8:30 pm

might be my eyes, but it looks as if the perches on the front axle aren't on at the same angle? good work though, looks worthy to be used under a steam locomotive used offroad! :D
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Project Bodge

Post by Anton » Tue Apr 07, 2015 11:24 pm

I rekon that's just the angle of the camera, but it does look like they're not level with each other. Optical illusion I think, because the camera is much closer to one perch than the other.

Nice work, Ferris!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Wed Apr 08, 2015 7:12 am

I thought I that when I looked at the picture, but I can confirm they look alot straighter in real life :P
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Thu Apr 16, 2015 6:29 pm

Finally got my delivery from Low Range Off-road today :D

A couple of diff gaurds and a truss kit.
Image

1" body lift, and axle rebuild kit plus various gaskets and seals
Image

Also thought id try these Trail Gear wheel bearing lock nuts. Im forever having to tighten my front wheel bearings, and the normal lock washers with the tabs you bend over tend to brake once you've taken them on and off a few times.
Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Project Bodge

Post by dan_2k_uk » Thu Apr 16, 2015 6:36 pm

That's a nice heap of goodies. :thumbup:
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
Online
User avatar
d_r_1989
Winching along now
Winching along now
Posts: 523
Joined: Tue Jul 08, 2014 1:49 pm
Location: Halifax west Yorkshire

Re: Project Bodge

Post by d_r_1989 » Thu Apr 16, 2015 8:00 pm

Some real good work here! Iv enjoyed reading it!
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Project Bodge

Post by Jordi » Thu Apr 16, 2015 9:39 pm

Shiney stuff!!! Gonna be busy!!!
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
Post Reply

Return to “Builds and Projects”