FILL TO THE TOP sj413

Got an electrical gremlin? Ask the question here.
User avatar
basil
Got muddy boots
Got muddy boots
Posts: 90
Joined: Fri Jul 11, 2014 5:47 pm
Location: THORNTON HEATH

FILL TO THE TOP sj413

Post by basil » Tue Mar 24, 2015 9:03 am

At the risk of being a pain ...has anyone any thoughts on this .....as my sender is playing up
in the tank i thought i might fill the tank right to the top just up to the filler cap so the variable resistor on the sender is immersed in the fuel ...i have added quite a bit of Redex hoping the cleaning properties of Redex will clean the sensor ... so reluctant to remove the tank at present freezing in my garage...
thanks for any thoughts on this
Jim

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: FILL TO THE TOP sj413

Post by Jordi » Tue Mar 24, 2015 9:44 am

Won't work in my opinion. My fuel gauge only works on the lower half and i regularly fill it.

Remove the tank, clean the sender or fit a new one!
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: FILL TO THE TOP sj413

Post by ScottieJ » Tue Mar 24, 2015 9:50 am

Honestly you just need to remove the tank and sort out the sender unit....it's easy plus it's not that cold anymore ;)
Zuki Build

Steady as she goes!

User avatar
timwilks13
SCUK Website Padawan
SCUK Website Padawan
Posts: 1248
Joined: Sun Feb 03, 2013 5:55 am
Location: Scarborough, soon to be Poland

Re: FILL TO THE TOP sj413

Post by timwilks13 » Tue Mar 24, 2015 9:56 am

You literally only have 3 options dude,
Drop the tank - easiest, do this one.
Lift the entire body off - do able, wouldn't advise.
Saw a gaping hole in the floor - do able, wouldn't advise.

Then remove the sender.
1986 SJ410 - Furry dice, new window winder.

10 kinds of people in this world, those who understand binary and those who dont.

if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: FILL TO THE TOP sj413

Post by Anton » Tue Mar 24, 2015 10:12 am

Mine seems to do the same, basically it likes to tell me that my tank is about half full or it likes to tell me it's empty.

I just live with it, but eventually I'll probably replace the sender.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: FILL TO THE TOP sj413

Post by twiss » Tue Mar 24, 2015 12:07 pm

Have a look at our guide for repairing a fuel sender, it may be more economical to fix yours or get a second hand replacement.
I think the last time I looked into replacing mine (was in a different fuel tank) they were about £125

http://www.suzukiclubuk.co.uk/diy/21-mi ... uel-sender

Although looking into it, it appears you can get one for a japanese (I think) fuel tank quite cheap from india

http://www.ebay.co.uk/itm/SUZUKI-FUEL-S ... 43c8057aa1
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: FILL TO THE TOP sj413

Post by ScottieJ » Tue Mar 24, 2015 12:23 pm

They are usually really easy to fix, i sorted mine a few years ago and it's been fine ever since, so worth trying before spending any money.


only takes around an hour, if that to drop the tank, fix it and re-fit.
Zuki Build

Steady as she goes!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: FILL TO THE TOP sj413

Post by ROBBIE » Tue Mar 24, 2015 12:58 pm

Buy a disco, lift the boot carpet and the floor will have rotted all the way round and so lift and there is the tank simples :mrgreen:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: FILL TO THE TOP sj413

Post by ScottieJ » Tue Mar 24, 2015 1:14 pm

ROBBIE wrote:Buy a disco, lift the boot carpet and the floor will have rotted all the way round and so lift and there is the tank simples :mrgreen:
You say that the earlier range rovers had an access panel for the in tank fuel pump..later ones and disco's don't so on my friends we cut out a hole in the floor and made a removable panel :lol:
Zuki Build

Steady as she goes!

User avatar
basil
Got muddy boots
Got muddy boots
Posts: 90
Joined: Fri Jul 11, 2014 5:47 pm
Location: THORNTON HEATH

Re: FILL TO THE TOP sj413

Post by basil » Tue Mar 24, 2015 3:02 pm

ScottieJ wrote:They are usually really easy to fix, i sorted mine a few years ago and it's been fine ever since, so worth trying before spending any money.


only takes around an hour, if that to drop the tank, fix it and re-fit.

Well been to petrol station filled to the top of filler neck after adding a bottle of Redex
fuel gauge now shows a little bit over the full mark ....remains to be seen if the sender will benefit
from being immersed in the Redex/petrol mixture....hope so otherwise it is as others have said its a
tank out job
Jim

Post Reply