Half doors

Henry · Post by **Henry** » Thu May 20, 2010 7:39 pm

Got a spare set of doors hear (somewhere

), wanting to turn them into half doors.

Undecided on how i want them to look yet tho, anyone got any pics?

Not to bothered about keeping the original handles, but it would be nice as i have keys for the locks... i know you can climb over them but it does finish it of

d86 · Post by **d86** » Thu May 20, 2010 8:35 pm

do a google pic search,there are loads in the states..

i like the plastic ones on the bay ..but..

at £300 they are a bit steap..

tony

Post by **ScottieJ** » Fri May 21, 2010 10:24 am

I've got some that I have half finished at home Henry. here's a bit of a crap pic

but i'll get I'll get some good pictures up at the weekend for you as I have a cunning little way of doing it so that the half doors still use the original door catches, I have removed the locks though as there isn't much point having locks on them

Post by **ScottieJ** » Fri May 21, 2010 12:17 pm

found another pic. I'll take a pic of what I have done to the catch mechanism. I've basically just cut all the unwanted bits of the mechanism off level with the cut on the door and then i'm going to have a hole in the top panel with a rubber grommet so you just push down on the mechanism through the hole and it opens the door. if you get what i mean

Imight actually finish these now that the sun is out, I'm going to box the tops in with some ally sheet rivited on.

Tramp · Post by **Tramp** » Fri May 21, 2010 1:23 pm

henry, if you are doing half doors I dont suppose you have the bit of the window winder mech that holds the glass have you? mines overly rusty and about to fall apart

Luke

Henry · Post by **Henry** » Sat May 22, 2010 6:23 am

Tramp wrote:henry, if you are doing half doors I dont suppose you have the bit of the window winder mech that holds the glass have you? mines overly rusty and about to fall apart

Luke

Looking for a good one myself

My drivers side rotted away about 6 months ago

ROBBIE · Post by **ROBBIE** » Sat May 22, 2010 7:58 am

im looking at doing half doors myself,got a pair out back just trying to get inspiration. if any1 wants ill have a look see what the window mech are like

Tramp · Post by **Tramp** » Sat May 22, 2010 1:24 pm

henry-the-hoover wrote:
Looking for a good one myself

My drivers side rotted away about 6 months ago

no worry's it was worth a punt, I was thinking about mybe making some clamps of my own, it annoyes me that the glass just sits in the groove and there is nothing to tighten to hold it,

Luke

Henry · Post by **Henry** » Sat May 22, 2010 4:37 pm

There is meant to be 2 rubbers to hold it in. I was thinking about getting come C Channel (thin) and using that.

But it would have to be exact to stop the window jamming where the rollers go.

Tramp · Post by **Tramp** » Sat May 22, 2010 8:17 pm

henry-the-hoover wrote:There is meant to be 2 rubbers to hold it in.

I know but it is just sort of sat in on it hoping that its wedged in well enough, rather than phisically clamped,

henry-the-hoover wrote:I was thinking about getting come C Channel (thin) and using that.But it would have to be exact to stop the window jamming where the rollers go.

Good point i thought about using nuts and boltsto clamp the halves together but like you said it probably wouldn't wind right up to the top then, I might just have to put the winder mech I've got back in I suppose if the track that the glass runs in is clear and lubed the glass shouldn't fall out anyway

Luke

Suzuki Club UK

Half doors

Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

Re: Half doors

test