Martin's Suzuki SJ413 - Update: Rust Rust Rust....

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Martin86
Can I have a tow
Can I have a tow
Posts: 327
Joined: Tue Dec 21, 2010 10:05 pm
Location: Ipswich, Suffolk
Contact:

Martin's Suzuki SJ413 - Update: Rust Rust Rust....

Post by Martin86 » Sat Dec 13, 2014 4:54 pm

I have been on this forum for a few years now but never really posted much as I didn't have a SJ! Anyway after 6 Months looking at Nato Green Painted rust buckets I found this little SJ down to road! Very little money changed hands and it was mine.

Bodywork: Overall it's not to bad, it's solid in the right places. Both Sills are going to need attention from the Welder before it can reach a MOT Station. Going to give it a good paint up underneath when finished. Passenger Front Wing is passed it but it's not structural and I hope to find a Replacement soon.


Mechanicals: Engine is coming up to 93,000 miles on the Clock. I am not sure when the last service was done or the Cambelt and Water Pump, so are on the List of Jobs. It's got a bad oil leaks from the Rocker Cover Gasket, Distributor and Front Crank Seal! It's got a terrible noise from the Front Passenger Wheel, it feels like it's about to fall off so going to need some attention! Rear Axle Brake Pipes are knackered and going to need to be replaced.

Interior: Looking very tired. Front Seats are split and torn, Rear Seat Missing. Carpet looks like Shag pile. Not sure on my Plans for this yet but im thinking of some Recaro Seats to start.

Pictures:

Image

Image

Image

Image

Image

Image

Image

The Rust

Image

Image

Image

Image

Image

Martin.
Last edited by Martin86 on Sat Sep 26, 2015 5:57 pm, edited 1 time in total.

User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: Martin's Suzuki SJ413

Post by Tramp » Sat Dec 13, 2014 5:48 pm

Nice, good find, it looks a little crusty but not too far gone! I can see you have a weber carb too, what's your plan? a road goer with subtle mods?

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Martin's Suzuki SJ413

Post by twiss » Sat Dec 13, 2014 6:11 pm

With that rust it looks like a good candidate for a virtual lift and box section sills ;)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Martin's Suzuki SJ413

Post by Anton » Sat Dec 13, 2014 6:18 pm

That's a slightly less than average amount of rust for an SJ. Nice find! And while I can't really say "welcome to the forums" because I've seen you around for a while now, I can at least say :welcome2: to SJ ownership!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Martin86
Can I have a tow
Can I have a tow
Posts: 327
Joined: Tue Dec 21, 2010 10:05 pm
Location: Ipswich, Suffolk
Contact:

Re: Martin's Suzuki SJ413

Post by Martin86 » Sat Dec 13, 2014 6:38 pm

Cheers Guys! Im not put off by the Rust as Im more into 1980s Fords!

Plans, Not sure to be honest! Get it on the road would be start! :doublethumbs:

Martin.

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Martin's Suzuki SJ413

Post by donkeychomp » Sat Dec 13, 2014 9:50 pm

Not that rusty at all! You can always find parts here...
If it ticks over...leave it

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Martin's Suzuki SJ413

Post by ScottieJ » Sat Dec 13, 2014 11:59 pm

I would like to join in and say it's not that rusty but I know from plenty of experience that once you start cutting and looking you'll find plenty more to repair. :lol: but as you are an 80s ford man I'm sure that won't even phase you :lol:
Zuki Build

Steady as she goes!

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Martin's Suzuki SJ413

Post by Anton » Sun Dec 14, 2014 3:27 am

Yeah, the average Escort or Sierra is what, 80% new metal, weld and filler by now? :)
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Martin86
Can I have a tow
Can I have a tow
Posts: 327
Joined: Tue Dec 21, 2010 10:05 pm
Location: Ipswich, Suffolk
Contact:

Re: Martin's Suzuki SJ413

Post by Martin86 » Sun Dec 14, 2014 12:05 pm

donkeychomp wrote:Not that rusty at all! You can always find parts here...
Thats good to know. I already got a rear seat and he belts from Jerry Attrick :D
ScottieJ wrote:I would like to join in and say it's not that rusty but I know from plenty of experience that once you start cutting and looking you'll find plenty more to repair. :lol: but as you are an 80s ford man I'm sure that won't even phase you :lol:
I have just finished a Fiesta Mk2 Xr2. I must have replaced every Weldable Panel on the thing!
Anton wrote:Yeah, the average Escort or Sierra is what, 80% new metal, weld and filler by now? :)
Thats true! My Fiesta had newspaper in the sills, just laughable! :lol:

Martin.

vit4x4
Got muddy boots
Got muddy boots
Posts: 41
Joined: Tue Nov 12, 2013 1:51 pm

Re: Martin's Suzuki SJ413

Post by vit4x4 » Sun Dec 14, 2014 3:12 pm

good condition and a Belfast reg no too

Post Reply